SiC414, SiC424
Vishay Siliconix
6 A, microBUCK® SiC414, SiC424
Integrated Buck Regulator with 5 V LDO
DESCRIPTION
FEATURES
•
•
•
•
•
•
High efficiency > 95 %
The Vishay Siliconix SiC414 and SiC424 are an advanced
stand-alone synchronous buck regulator featuring integrated
power MOSFETs, bootstrap switch, and an internal 5 VLDO
in a space-saving PowerPAK MLP44-28L package.
6 A continuous output current capability
Integrated bootstrap switch
Integrated 5 V/200 mA LDO with bypass logic
Temperature compensated current limit
The SiC414 and SiC424 are capable of operating with all
ceramic solutions and switching frequencies up to 1 MHz.
The programmable frequency, synchronous operation and
selectable power-save allow operation at high efficiency
across the full range of load current. The internal LDO may
be used to supply 5 V for the gate drive circuits or it may be
bypassed with an external 5 V for optimum efficiency and
used to drive external n-channel MOSFETs or other loads.
Additional features include cycle-by-cycle current limit,
voltage soft-start, under-voltage protection, programmable
over-current protection, soft shutdown and selectable
power-save. The Vishay Siliconix SiC414 and SiC424 also
provides an enable input and a power good output.
Pseudo fixed-frequency adaptive on-time
control
•
•
•
•
•
•
•
•
•
All ceramic solution enabled
Programmable input UVLO threshold
Independent enable pin for switcher and LDO
Selectable ultrasonic power-save mode (SiC414)
Selectable power-save mode (SiC424)
Internal soft-start and soft-shutdown
1 % internal reference voltage
Power good output and over voltage protection
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRODUCT SUMMARY
Input Voltage Range
Output Voltage Range
Operating Frequency
Continuous Output Current
Peak Efficiency
3 V to 28 V
0.75 V to 5.5 V
200 kHz to 1 MHz
6 A
APPLICATIONS
•
•
•
•
•
•
Notebook, desktop, and server computers
Digital HDTV and digital consumer applications
Networking and telecommunication equipment
Printers, DSL, and STB applications
Embedded applications
95 %
Package
PowerPAK MLP44-28L
Point of load power supplies
TYPICAL APPLICATION CIRCUIT AND PACKAGE OPTION
LDO_EN
EN/PSV (Tri-State)
3.3 V
VOUT
PGOOD
28 27 26 25 24 23 22
VOUT
FB
21
1
2
LX
LX
V5V
AGND
VOUT
VIN
20
19
18
17
PAD1
AGND
3
4
5
6
7
PGND
PGND
PAD3
LX
VIN
PAD2
VIN
PGND
P
VLDO
BST
GND 16
15
LX
10 11 12 13 14
8
9
Document Number: 63388
S13-0248-Rev. B, 04-Feb-13
For technical questions, contact: powerictechsupport@vishay.com
This document is subject to change without notice.
www.vishay.com
1
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000