®
RT8016
1.5MHz, 1A, High Efficiency PWM Step-Down DC/DC
Converter
General Description
Features
ꢀ +2.5V to +5.5V Input Range
ꢀ Adjustable Output From 0.6V to VIN
ꢀ 1A Output Current
The RT8016 is a high-efficiency Pulse-Width-Modulated
(PWM) step-downDC-DC converter. Capable of delivering
1A output current over a wide input voltage range from
2.5V to 5.5V, the RT8016 is ideally suited for portable
electronic devices that are powered from 1-cell Li-ion
battery or from other power sources such as cellular
phones, PDAs and hand-held devices.
ꢀ 95% Efficiency
ꢀ No Schottky Diode Required
ꢀ 1.5MHz Fixed Frequency PWM Operation
ꢀ Small 6-Lead WDFN Package
ꢀ RoHS Compliant and 100% Lead (Pb)-Free
Two operating modes are available including : PWM/Low-
Dropout autoswitch and shut-down modes, the Internal
synchronous rectifier with low RDS(ON) dramatically reduces
conduction loss at PWM mode. No external Schottky
diode is required in practical application.
Applications
ꢀ Mobile Phones
ꢀ Personal InformationAppliances
ꢀ Wireless and DSL Modems
ꢀ MP3 Players
The RT8016 enters Low-Dropout mode when normal PWM
cannot provide regulated output voltage by continuously
turning on the upper PMOS. The RT8016 enters shut-
down mode and consumes less than 0.1uA when EN pin
is pulled low. The RT8016 also offers a range of 1V to
3.3V with 0.1V per step or adjustable output voltage by
two external resistor.
ꢀ Portable Instruments
Ordering Information
RT8016-
Package Type
QW : WDFN-6L 2x2 (W-Type)
The switching ripple is easily smoothed-out by small
package filtering elements due to a fixed operating
frequency of 1.5MHz. This along with small WDFN-6L2x2
package provides small PCB area application. Other
features include soft start, lower internal reference voltage
with 2% accuracy, over temperature protection, and over
current protection.
Lead Plating System
P : Pb Free
G : Green (Halogen Free and Pb Free)
Output Voltage
Default : Adjustable
10 : 1.0V
11 : 1.1V
:
32 : 3.2V
33 : 3.3V
Pin Configurations
Note :
(TOP VIEW)
Richtek products are :
1
2
3
6
5
4
FB/VOUT
GND
GND
EN
` RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
` Suitable for use in SnPb or Pb-free soldering processes.
7
VIN
LX
WDFN-6L 2x2
Marking Information
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
area.
Copyright 2012 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DS8016-04 February 2012
www.richtek.com
1