NEW PRODUCT
NEW PRODUCT
NEW PRODUCT
GIB2401 THRU GIB2404
GLASS PASSIVATED PLASTIC RECTIFIER
Reverse Voltage - 50 to 200 Volts
Forward Current - 16.0 Amperes
TO-263AB
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
0.160 (4.06)
0.190 (4.83)
0.380 (9.65)
0.420 (10.67)
0.045 (1.14)
0.055 (1.40)
♦ Dual rectifier construction, positive centertap
♦ Glass passivated chip junctions
♦ Low power loss
0.245 (6.22)
MIN
K
0.047 (1.19)
♦ High surge capability
0.320 (8.13)
0.360 (9.14)
0.055 (1.40)
0.575 (14.60)
0.625 (15.88)
♦ Superfast recovery times for high efficiency
♦ High temperature soldering in accordance with
CECC 802 / Reflow guaranteed
K
1
2
SEATING
PLATE
0.090 (2.29)
-T-
0.110 (2.79)
0.018 (0.46)
0.025 (0.64)
0.095 (2.41)
0.100 (2.54)
0.080 (2.03)
0.110 (2.79)
0.027 (0.686)
0.037 (0.940)
MECHANICAL DATA
Case: JEDEC TO-263AB molded plastic body
Terminals: Plated lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Mounting Position: Any
PIN 1
PIN 2
K - HEATSINK
Weight: 0.08 ounce, 2.24 grams
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
.
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
VRRM
VRMS
VDC
GIB2401
50
GIB2402
100
GIB2403
150
GIB2404
200
UNITS
Volts
Volts
Volts
Maximum recurrent peak reverse voltage
Maximum RMS voltage
35
70
105
140
Maximum DC blocking voltage
50
100
150
200
Maximum average forward rectified current
at TC=125°C
I(AV)
16.0
Amps
Amps
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method) at TC=125°C
IFSM
125.0
Maximum instantaneous forward voltage per leg at:
IF=4A, TJ=25°C
0.975
0.900
0.800
0.895
IF=8A, TJ=25°C
IF=4A, TJ=100°C
IF=8A, TJ=100°C
VF
Volts
Maximum DC reverse current
at rated DC blocking voltage
TC=25°C
TC=100°C
50.0
150.0
5.0
500.0
IR
µA
Maximum reverse recovery time per leg (NOTE1)
Typical junction capacitance per leg (NOTE 2)
Typical thermal resistance (NOTE 3)
trr
CJ
35.0
85.0
2.2
ns
pF
RΘJC
TJ, TSTG
°C/W
°C
Operating junction and storage temperature range
-65 to +150
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to case per leg mounted on heatsink
4/98