DATA SHEET
GBPC12,15,25 AND 35 Series
SEMICONDUCTOR
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
Reverse Voltage - 50 to 1000 Volts Current Voltage - 12.0 to 35.0 Amperes
FEATURES
‧ The plastic package has Underwriters Laboratory Flammability Classification 94V-0
‧ This series is UL recognized under component index, file number E54214
‧ Integrally molded heatsink provides very low thermal resistance for maximum heat
dissipation
‧ Universal 3-way terminals; snap-on, wire wrap-around, or P.C.B. mounting
‧ High forward surge current capabilities
‧ Glass passivated chip junctions
‧ Typical IR less than 0.3mA
‧ High temperature soldering guaranteed:
260°C/10 seconds at 5lbs. (2.3 kg) tension
‧ High temperature soldering : 260OC / 10 seconds at terminals
‧ Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
MECHANICAL DATA
‧ Case: Molded plastic with heatsink integrally mounted in the bridge encapsulation
‧ Terminals: Either plated 0.25" (6.35mm). Faston lugs or plated copper leads 0.040"
(1.02mm) diameter. Suffix letter "W" added to indicate leads (e.g. GBPC12005W).
‧ Mounting Position: See NOTE 3
‧ Polarity: Polarity symbols molded on body
‧ Mounting Torque: 20 in. - lb. max. Weight: 0.53 ounce, 15 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
GBPC12, 15, 25, 35
SYMBOLS
VRRM
VRMS
005
50
01
100
70
02
04
06
08
800 1000 Volts
560 700 Volts
10
UNITS
Maximum repetitive peak reverse voltage
Maximum RMS voltage
200
140
200
400
600
420
600
35
280
Maximum DC blocking voltage
Maximum average forward
rectified output current
VDC
50
100
400
800 1000 Volts
GBPC12
GBPC15
GBPC25
GBPC35
GBPC12
GBPC15
GBPC25
GBPC35
GBPC12
GBPC15
GBPC25
GBPC35
IF=6.0A
12.0
15.0
I(AV)
IFSM
I2t
Amps
(SEE FIG.1)
25.0
35.0
Peak forward surge current single
sine-wave superimposed on
rated load (JEDEC Method)
200.0
300.0
300.0
400.0
160.0
375.0
375.0
660.0
Amps
Rating (non-repetitive, for t
greater than 1ms and less
than 8.3ms) for fusing
A2 sec
Maximum instantaneous
forward voltage drop per
leg at
GBPC12
GBPC15 IF=7.5A
GBPC25 IF=12.5A
GBPC35 IF=17.5A
VF
IR
1.1
Volts
Maximum reverse DC current at rated
DC blocking voltage per leg
TA=25°C
TA=125°C
5.0
500.0
2500.0
300.0
1.9
uA
RMS isolation voltage from case to leads
VISO
CJ
Volts
pF
Typical junction capacitance per leg (NOTE 1)
Typical thermal resistance per leg (NOTE 2)
GBPC12-25
GBPC35
RQJC
°C/W
°C
1.4
Operating junction storage temperature range
TJ, TSTG
-55 to +150
NOTES:
(1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(2) Thermal resistance from junction to case per leg
(3) Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw
http://www.yeashin.com REV.02 20110725
1