Document 636-1
For National Semiconductor
Power Inductor
–
GA3252-AL LM3433 LED Driver
• High current surface mount toroidal power inductor
• Specified by National Semiconductor for 2 A to 14 A output
applications
Core material Ferrite
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Weight 11.6 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +85°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Packaging 200 per 13″ reel Plastic tape: 44 mm wide,
0.5 mm thick, 32 mm pocket spacing, 10.4 mm pocket depth
PCB washing Only pure water or alcohol recommended
Isat (A)5
±20 drop 320 drop
Irms (A)6
±2°C rise 42°C rise
Part
Inductance2
±±20 (ꢀµ)
DCR max3
(Ohms)
SRF typ4
(Mµz)
number1
120 drop
GA3252-AL_
12.0
0.017
20
6.5
8.0
13
6.5
10
1. When ordering, specify termination and packaging codes:
GA3±5±-ALD
0.079
2,00
Termination: L = RoHS compliant tin-silver over copper.
Special order:
GA3252-AL
XXXXY
0.940
max
0.700
17,78
T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
23,88
Packaging: D = 13″ machine-ready reel
EIA-481 embossed plastic tape (200 per full reel).
0.820
20,83
B = Less than full reel
0.940
max
In tape, but not machine ready. To have a leader and
trailer added ($25 charge), use code letter D instead.
23,88
Recommended
Land Pattern
Parts manufactured prior
to December 2011 may
be marked differently.
2. Inductance tested at 100 kHz, 0.1 Vrms on Agilent/HP 4192A.
3. DCR measured on a Keithley 580 micro-ohmmeter or equivalent.
4. SRF measured on an Agilent/HP 8753ES network analyzer.
5. DC current at which the inductance drops the specified amount from its
value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
0.413
max
10,50
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
0.820
20,83
0.005 / 0,13 mm
inches
mm
Dimensions are in
Document 636-1 Revised 12/16/11
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.