5秒后页面跳转
捷配首页

Datasheet > FTSH-114-01-L-DV-EJ-A
FTSH-114-01-L-DV-EJ-A PDF预览

FTSH-114-01-L-DV-EJ-A

更新时间： 2024-11-06 20:57:07
品牌 Logo 应用领域
申泰 - SAMTEC PC连接器
页数 文件大小 规格书
5页 540K
描述
Board Connector, 28 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Surface Mount Terminal, Latch & Eject, Black Insulator, Receptacle,

阅读下载

中文翻译

获取价格

FTSH-114-01-L-DV-EJ-A 技术参数

是否Rohs认证： 符合生命周期：Active
Reach Compliance Code：not_compliantECCN代码：EAR99
HTS代码：8536.69.40.40Factory Lead Time：2 weeks
风险等级：1.82板上安装选件：POSITIONING PIN
主体宽度：0.222 inch主体长度：1.321 inch
主体/外壳类型：RECEPTACLE连接器类型：BOARD CONNECTOR
联系完成配合：GOLD (10) OVER NICKEL (50)联系完成终止：Tin (Sn) - with Nickel (Ni) barrier
触点性别：MALE触点材料：PHOSPHOR BRONZE
触点模式：RECTANGULAR触点样式：SQ PIN-SKT
DIN 符合性：NO滤波功能：NO
IEC 符合性：NO绝缘体颜色：BLACK
绝缘体材料：LIQUID CRYSTAL POLYMER (LCP)JESD-609代码：e3
MIL 符合性：NO插接触点节距：0.05 inch
匹配触点行间距：0.05 inch插接信息：MULTIPLE MATING PARTS AVAILABLE
混合触点：NO安装选项1：LATCH & EJECT
安装方式：STRAIGHT安装类型：BOARD
连接器数：ONEPCB行数：2
装载的行数：2最高工作温度：125 °C
最低工作温度：-65 °C选件：GENERAL PURPOSE
PCB接触模式：RECTANGULARPCB触点行间距：4.064 mm
电镀厚度：10u inch极化密钥：CENTER
额定电流（信号）：1.8 A可靠性：COMMERCIAL
子类别：Headers and Edge Type Connectors端子节距：1.27 mm
端接类型：SURFACE MOUNT触点总数：28
Base Number Matches：1

FTSH-114-01-L-DV-EJ-A 数据手册

 浏览型号FTSH-114-01-L-DV-EJ-A的Datasheet PDF文件第2页浏览型号FTSH-114-01-L-DV-EJ-A的Datasheet PDF文件第3页浏览型号FTSH-114-01-L-DV-EJ-A的Datasheet PDF文件第4页浏览型号FTSH-114-01-L-DV-EJ-A的Datasheet PDF文件第5页 
NOTES:  
FTSH-1XX-XX-XXX-DV-XXX  
REVISION ET  
C
1.  
REPRESENTS A CRITICAL DIMENSION.  
OPTIONS  
No OF POSITIONS  
-02 THRU -50  
2. PARTS MAY BE CUT TO POSITION.  
-P: PICK & PLACE PAD (4 POS MIN)  
3. MAXIMUM CUT FLASH: .015[0.38],  
(SEE FIG 11, SHT 4 & TABLE 5)  
(PER ROW)  
LOOSE FLASH MUST BE REMOVED.  
-TR: TAPE & REEL PACKAGING  
4. MINIMUM PUSHOUT FORCE: 1.0 LB.  
-ES: END SHROUDS (SEE FIG 6, SHT 3)  
LEAD STYLE  
5. MEASURED AT BEND RADIUS, NOT AT END OF PIN.  
6. TUBE ONLY -04 THROUGH -50 POSITIONS (SEE TABLE 2).  
7. SHEAR TAILS TO DIMENSION SHOWN.  
(MOLDED IN 5 POS MIN; -02 & -03 LEAD STYLE ONLY)  
(SNAP SHROUDS 9 POS MIN; -02 & -03 LEAD STYLE ONLY)  
(MUST USE FTSH-50-D)  
-01: .120 [3.05]  
-02: .075 [1.91]  
-03: .065 [1.65]  
-04: .150 [3.81]  
-05 .170 [4.32]  
-14: .150 [3.81]  
DO NOT  
SCALE FROM  
THIS PRINT  
8. MAXIMUM BURR ALLOWANCE: .003 [0.08]  
-EJ: EJECTOR SHROUDS: SEE FIG 4, SHT 2)  
(10 POS MIN; -01 LEAD STYLE ONLY)(MUST USE FTSH-50-D)  
-EJM: EJECTOR SHROUDS WITH MOLDED ALIGNMENT PIN  
(SEE FIG 5, SHT 2; 10 POS MIN; -01 LEAD STYLE ONLY)  
(NOT VALID WITH -A OPTION)(MUST USE FTSH-50-D)  
-EJC: EJECTOR SHROUDS WITH LOCKING CLIP  
(SEE FIG 5, SHT 2 & NOTE 11)  
9. GOLD PLATING TO BE ON POST, TIN PLATING TO BE ON TAIL.  
10. FILL WITH ALIGNMENT PIN HOLES TO TAIL SIDE.  
11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, LOCKING CLIPS  
ARE NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS  
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH LOCKING CLIPS.  
12. VOIDS MAY OR MAY NOT BE PRESENT ON POSITIONS 5 THRU 8 AND CAN  
BE MIXED WITHIN AN ORDER.  
(NOT AVAILABLE WITH  
-SM, FM, LM PLATING OPTIONS)  
PLATING SPECIFICATION  
(10 POS MIN; -01 LEAD STYLE ONLY; NOT VALID WITH -A  
OPTION)  
(MUST USE FTSH-50-D)  
13. ON LEAD STYLES -01 THROUGH -04 THE T-1S15-03 CAN  
BE SUBSTITUTED FOR T-1S15-14.  
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL  
C
-EC: LOCKING CLIP (SEE FIG 7, SHT 3 & NOTE 11)  
(9 POS MIN; -02 & -03 LEAD STYLE ONLY)(MUST USE FTSH-50-D)  
-EP: GUIDE POST (SEE FIG 8, SHT 3; 9 POS MIN; -02 & -03 LEAD STYLE  
ONLY)  
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL  
+.005 +0.13  
No OF POS x .0500  
[
]
-.010 -0.25  
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL  
(USE ONLY WHEN MATING WITH CLP)(MUST USE FTSH-50-D)  
-EL: BOARD LOCK (SEE FIG 9, SHT 3)  
(No OF POS x .0500[1.27]) - .050[1.27]  
-H: 30µ" GOLD IN CONTACT AREA,  
3µ" GOLD ON TAIL  
(9 POS MIN; -02 & -03 LEAD STYLE ONLY)  
02  
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL  
50  
(USE ONLY WHEN MATING WITH CLP)(MUST USE FTSH-50-D)  
-EPC: GUIDE POST & LOCKING CLIP  
(SEE FIG 10, SHT 3 & NOTE 11; USE ONLY WHEN MATING WITH CLP)  
(9 POS MIN; -02 & -03 LEAD STYLE ONLY; NOT VALID  
WITH -A OPTION)(MUST USE FTSH-50-D)  
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL  
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL  
.135 3.43  
REF  
-A: ALIGNMENT PIN (MOLDED OR STAKED; SEE FIG 3, SHT 2)  
(MOLDED: 3 POS MIN; STAKED: 6 POS MIN)  
(SAMTEC DISCRETION ON WHICH -A PIN USED)  
(MUST USE FTSH-50-D)  
-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,  
TIN/LEAD (90/10+/-5%) TAIL  
-G: 10µ" GOLD IN CONTACT AREA,  
3µ" GOLD ON TAIL  
-K: KEYING OPTION FOR MATING WITH FFSD  
(SEE TABLE 3, SHT 2; 05 THRU 25 AVAILABLE AS STANDARD)  
(POSITION 13, 17, 20 & 25 AVAILABLE WITH -EJ OPTION)  
(LEAD STYLE -01 ONLY, SEE FIG 2, SHT 2 & NOTE 12)  
(ALIGNMENT PIN AVAILABLE WITH -K OPTION BUT MUST BE MOLDED)  
(MUST USE FTSH-XX-CN-XX)  
49  
01  
TAIL OPTION  
-DV: DOUBLE VERTICAL  
FTSHC-50-D  
2
MAX SWAY  
(USE **FTSHC-1XX-XX-XXX-DV FOR ALL OPTIONS  
EXCEPT -ES, -EJ, -EJM, -EJC, -EC, -EP, -EL, -EPC, -A,  
THEN USE FTSH-50-D AND BUILD PER PRINT)  
(EITHER DIRECTION)  
-M: METAL PICK & PLACE PAD (5 POS MIN; USE MPP-22-5)  
(SEE FIG 12, SHT 4; NOT AVAILABLE WITH -K OPTION)  
*
** = SEE FTSHC-1XX-XX-XXX-DX-XX PRINT FOR DETAILS  
* = NOT ENGINEERING APPROVED  
2
MAX SWAY  
C
(EITHER DIRECTION)  
.016 0.41 SQ  
REF (TYP)  
2
MAX SWAY  
.050±.008 1.27±0.20  
(EITHER DIRECTION)  
SEE TABLE 1  
C
"B"  
90°±3°  
CONTACT AREA  
(SEE NOTE 9 & TABLE 1)  
"A"  
C
+.005  
-.003  
+0.13  
.099 2.51  
REF  
.115  
2.92  
-0.08  
(SEE NOTE 5)  
SEE NOTE 3  
(2 PLCS)  
.004[.10]  
.23 5.8  
(SEE NOTE 7)  
.230 5.84 REF  
HAND FILL USING T-1S40  
FIG 1  
PATENT NUMBERS  
SEE NOTE 8  
FTSH-1XX-XX-XXX-DV SHOWN  
(SEE FTSHC-1XX-XX-XXX-DX-XX PRINT FOR DETAILS)  
5713755 / 5961339  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS INFORMATION  
CONFIDENTIAL AND PROPRIETARY TO  
SAMTEC, INC. AND SHALL NOT BE REPRODUCED  
OR TRANSFERRED TO OTHER DOCUMENTS OR  
DISCLOSED TO OTHERS OR USED FOR ANY  
PURPOSE OTHER THAN THAT WHICH IT WAS  
OBTAINED WITHOUT THE EXPRESSED WRITTEN  
CONSENT OF SAMTEC, INC.  
UNLESS OTHERWISE SPECIFIED,  
DIMENSIONS ARE IN INCHES.  
TOLERANCES ARE:  
DECIMALS  
ANGLES  
1
.XX: .01 [.3]  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
.XXX: .005 [.13]  
PHONE: 812-944-6733  
e-Mail info@SAMTEC.com  
DESCRIPTION:  
FAX: 812-948-5047  
.XXXX: .0010 [.025]  
code 55322  
SHEET SCALE: 5:1  
MATERIAL:  
DO NOT SCALE DRAWING  
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP  
INSULATOR: LCP UL 94 VO  
TERMINAL: PHOSPHOR BRONZE  
NO.  
DWG. FTSH-1XX-XX-XXX-DV-XXX  
* = SEE NOTE 13  
10/12/1995 SHEET 1 OF  
BY: PURVIS  
5
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-MKT.SLDDRW  
12345

中文翻译

下载PDF

与FTSH-114-01-L-DV-EJ-A相关器件

型号 品牌 获取价格 描述 数据表
FTSH-114-01-L-DV-EJ-A-P-TR SAMTEC

获取价格

 		.050'' X .050 TERMINAL STRIP
FTSH-114-01-L-DV-EJ-P SAMTEC

获取价格

 		.050'' X .050 TERMINAL STRIP
FTSH-114-01-L-DV-K SAMTEC

获取价格

 		.050'' X .050 TERMINAL STRIP
FTSH-114-01-L-DV-K-A SAMTEC

获取价格

 		.050'' X .050 TERMINAL STRIP
FTSH-114-01-L-DV-K-A-P SAMTEC

获取价格

 		.050'' X .050 TERMINAL STRIP
FTSH-114-01-L-DV-K-A-P-TR SAMTEC

获取价格

 		.050'' X .050 TERMINAL STRIP
FTSH-114-01-L-DV-K-P SAMTEC

获取价格

 		.050'' X .050 TERMINAL STRIP
FTSH-114-01-L-DV-K-P-TR SAMTEC

获取价格

 		.050'' X .050 TERMINAL STRIP
FTSH-114-01-L-DV-K-TR SAMTEC

获取价格

 		.050'' X .050 TERMINAL STRIP
FTSH-114-01-L-DV-P SAMTEC

获取价格

 		.050'' X .050 TERMINAL STRIP

与FTSH-114-01-L-DV-EJ-A相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证