Datasheet > FTSH-110-01-L-DV-EJ-A

FTSH-110-01-L-DV-EJ-A

更新时间： 2024-11-09 18:20:59

品牌	Logo	应用领域
申泰 - SAMTEC		PC 连接器
页数	文件大小	规格书
5页	484K
描述
Board Connector, 20 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Surface Mount Terminal, Locking, Receptacle,

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

FTSH-110-01-L-DV-EJ-A 技术参数

是否Rohs认证：	符合	生命周期：	Active
Reach Compliance Code：	not_compliant	ECCN代码：	EAR99
HTS代码：	8536.69.40.40	Factory Lead Time：	2 weeks
风险等级：	1.64	其他特性：	EJECTOR SHROUD
主体宽度：	0.135 inch	主体深度：	0.44 inch
主体长度：	0.5 inch	连接器类型：	BOARD CONNECTOR
联系完成配合：	GOLD (10) OVER NICKEL (50)	联系完成终止：	Tin (Sn) - with Nickel (Ni) barrier
触点性别：	MALE	触点材料：	PHOSPHOR BRONZE
触点模式：	RECTANGULAR	触点样式：	SQ PIN-SKT
DIN 符合性：	NO	滤波功能：	NO
IEC 符合性：	NO	绝缘体材料：	LIQUID CRYSTAL POLYMER (LCP)
JESD-609代码：	e3	MIL 符合性：	NO
插接触点节距：	0.05 inch	匹配触点行间距：	0.05 inch
插接信息：	MULTIPLE MATING PARTS AVAILABLE	混合触点：	NO
安装选项1：	LOCKING	安装方式：	STRAIGHT
安装类型：	BOARD	连接器数：	ONE
PCB行数：	2	装载的行数：	2
选件：	GENERAL PURPOSE	PCB接触模式：	RECTANGULAR
PCB触点行间距：	4.064 mm	电镀厚度：	10u inch
参考标准：	UL	可靠性：	COMMERCIAL
子类别：	Headers and Edge Type Connectors	端子节距：	1.27 mm
端接类型：	SURFACE MOUNT	触点总数：	20
Base Number Matches：	1

FTSH-110-01-L-DV-EJ-A 数据手册

浏览型号FTSH-110-01-L-DV-EJ-A的Datasheet PDF文件第2页

浏览型号FTSH-110-01-L-DV-EJ-A的Datasheet PDF文件第3页

浏览型号FTSH-110-01-L-DV-EJ-A的Datasheet PDF文件第4页

浏览型号FTSH-110-01-L-DV-EJ-A的Datasheet PDF文件第5页

NOTES:

FTSH-1XX-XX-XXX-DV-XXX-XXX

REVISION FG

REPRESENTS A CRITICAL DIMENSION.

OPTIONS

2. PARTS MAY BE CUT TO POSITION.

No OF POSITIONS

-02 THRU -50

(PER ROW)

-P: PICK & PLACE PAD (4 POS MIN)

3. MAXIMUM CUT FLASH: .015[0.38],

(SEE FIG 11, SHT 4 & TABLE 5)

LOOSE FLASH MUST BE REMOVED.

-TR: TAPE & REEL PACKAGING

DO NOT

SCALE FROM

THIS PRINT

4. MINIMUM PUSHOUT FORCE: 1.0 LB.

-ES: END SHROUDS (SEE FIG 6, SHT 3)

5. MEASURED AT BEND RADIUS, NOT AT END OF PIN.

6. TUBE ONLY -04 THROUGH -50 POSITIONS (SEE TABLE 2).

7. SHEAR TAILS TO DIMENSION SHOWN.

LEAD STYLE

(MOLDED IN 5 POS MIN; -02 & -03 LEAD STYLE ONLY)

(SNAP SHROUDS 9 POS MIN; -02 & -03 LEAD STYLE ONLY)

-EJ: EJECTOR SHROUDS: SEE FIG 4, SHT 2)

-01: .120 [3.05]

-02: .075 [1.91]

8. MAXIMUM BURR ALLOWANCE: .003 [0.08]

-03: .065 [1.65]

(10 POS MIN; -01 LEAD STYLE ONLY)

9. GOLD PLATING TO BE ON POST, TIN PLATING TO BE ON TAIL.

10. FILL WITH ALIGNMENT PIN HOLES TO TAIL SIDE.

11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, LOCKING CLIPS

ARE NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS

MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH LOCKING CLIPS.

12. VOIDS MAY OR MAY NOT BE PRESENT ON POSITIONS 5 THRU 8 AND CAN

BE MIXED WITHIN AN ORDER.

-04: .150 [3.81]

-EJM: EJECTOR SHROUDS WITH MOLDED ALIGNMENT PIN

(SEE FIG 5, SHT 2; 10 POS MIN; -01 LEAD STYLE ONLY)

(NOT VALID WITH -A OPTION)

-EJC: EJECTOR SHROUDS WITH LOCKING CLIP

(SEE FIG 5, SHT 2 & NOTE 11)

(10 POS MIN; -01 LEAD STYLE ONLY; NOT VALID WITH -A OPTION)

-EC: LOCKING CLIP (SEE FIG 7, SHT 3 & NOTE 11)

(9 POS MIN; -02 & -03 LEAD STYLE ONLY)

-EP: GUIDE POST (SEE FIG 8, SHT 3; 9 POS MIN; -02 & -03 LEAD STYLE

ONLY)(USE ONLY WHEN MATING WITH CLP)

-EL: BOARD LOCK (SEE FIG 9, SHT 3)

-05 .170 [4.32]

-14: .150 [3.81](NOT AVAILABLE

WITH -SM, FM, LM PLATING

OPTIONS)

PLATING SPECIFICATION

-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

13. ON LEAD STYLES -02 THROUGH -03 THE T-1S15-18-XXX CAN

BE SUBSTITUTED FOR T-1S15-16-XXX.

14. ON LEAD STYLES -01 AND -04, T-1S15-17 CAN BE

SUBSTITUTED FOR T-1S15-15-XXX.

-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

15. NO TIN PLATING ALLOWED ON THE POST FOR

LEAD STYLES -01, -02, -03 & -04 IN COMBINATION WITH THE

T-1S15-XX-XXX TERMINAL.

(9 POS MIN; -02 & -03 LEAD STYLE ONLY)

(USE ONLY WHEN MATING WITH CLP)

-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

-EPC: GUIDE POST & LOCKING CLIP

(SEE FIG 10, SHT 3 & NOTE 11; USE ONLY WHEN MATING WITH CLP)

(9 POS MIN; -02 & -03 LEAD STYLE ONLY; NOT VALID

WITH -A OPTION)

-H: 30µ" GOLD IN CONTACT AREA,

3µ" GOLD ON TAIL

+.005 +0.13

No OF POS x .0500

[

]

-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

-A: ALIGNMENT PIN (MOLDED OR STAKED; SEE FIG 3, SHT 2)

(MOLDED: 3 POS MIN; STAKED: 6 POS MIN)

(SAMTEC DISCRETION ON WHICH -A PIN USED)

-K: KEYING OPTION FOR MATING WITH FFSD

(SEE TABLE 3, SHT 2; 05 THRU 25 AVAILABLE AS STANDARD)

(POSITION 13, 17, 20 & 25 AVAILABLE WITH -EXX OPTION)

(LEAD STYLE -01 ONLY, SEE FIG 2, SHT 2 & NOTE 12)

(ALIGNMENT PIN AVAILABLE WITH -K OPTION BUT MUST BE MOLDED)

(MUST USE FTSH-50-CN-XX-X OR FTSHC-50-CN-XX-X)

-M: METAL PICK & PLACE PAD (5 POS MIN; USE MPP-22-5)

(SEE FIG 12, SHT 4; NOT AVAILABLE WITH -K OPTION)

-.010 -0.25

(No OF POS x .0500[1.27]) - .050[1.27]

-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,

MATTE TIN ON TAIL

-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,

TIN/LEAD (90/10+/-5%) TAIL

-G: 10µ" GOLD IN CONTACT AREA,

3µ" GOLD ON TAIL

.135 3.43

REF

TAIL OPTION

-DV: DOUBLE VERTICAL

POLARIZING OPTION

XXX INDICATES POSITION TO BE OMITTED

(NOT AVAILABLE WITH EXX OPTIONS)

(ONLY AVAILABLE WITH -F, -FM, -L, -LM PLATING OPTIONS)

FTSH-50-D

MAX SWAY

(EITHER DIRECTION)

* = NOT ENGINEERING APPROVED

.016 0.41 SQ

REF (TYP)

MAX SWAY

.050±.008 1.27±0.20

(EITHER DIRECTION)

SEE TABLE 1

MAX SWAY

(EITHER DIRECTION)

"B"

90°±3°

CONTACT AREA

(SEE NOTE 9 & TABLE 1)

"A"

+.005

-.003

+0.13

2.92

-0.08

.099 2.51

REF

.115

(SEE NOTE 5)

SEE NOTE 3

(2 PLCS)

.004[.10]

.23 5.8

(SEE NOTE 7)

PATENT NUMBERS

.230 5.84 REF

FIG 1

5713755 / 5961339

SEE NOTE 8

FTSH-1XX-XX-XXX-DV SHOWN

HAND FILL USING T-1S40

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS CONFIDENTIAL AND

PROPRIETARY INFORMATION AND ALL DESIGN,

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS

AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,

INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE

OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR

REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY

OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS

WRITTEN CONSENT OF SAMTEC, INC.

TOLERANCES ARE:

DECIMALS

ANGLES

.XX: .01 [.3]

520 PARK EAST BLVD, NEW ALBANY, IN 47150

.XXX: .005 [.13]

PHONE: 812-944-6733

e-Mail info@SAMTEC.com

DESCRIPTION:

FAX: 812-948-5047

.XXXX: .0010 [.025]

code 55322

SHEET SCALE: 5:1

MATERIAL:

DO NOT SCALE DRAWING

.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP

INSULATOR: LCP UL 94 VO

TERMINAL: PHOSPHOR BRONZE

DWG. NO.

FTSH-1XX-XX-XXX-DV-XXX-XXX

* = SEE NOTE 13

*** = SEE NOTE 14

10/12/1995 SHEET 1 OF

BY: PURVIS

F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW

12 3 4 5

中文翻译

下载PDF

与FTSH-110-01-L-DV-EJ-A相关器件

型号	品牌	获取价格	描述	数据表
FTSH-110-01-L-DV-EJ-A-P	SAMTEC	获取价格	CONN UNSHROUDED HDR 20POS .05"
FTSH-110-01-L-DV-EJ-A-P-TR	SAMTEC	获取价格	.050'' X .050 TERMINAL STRIP
FTSH-110-01-L-DV-EJ-A-TR	SAMTEC	获取价格	.050'' X .050 TERMINAL STRIP
FTSH-110-01-L-DV-EJC	SAMTEC	获取价格	.050'' X .050 TERMINAL STRIP
FTSH-110-01-L-DV-EJ-K-P	SAMTEC	获取价格	Board Connector, 20 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Surface Mount T
FTSH-110-01-L-DV-EJM	SAMTEC	获取价格	.050'' X .050 TERMINAL STRIP
FTSH-110-01-L-DV-EJM-P	SAMTEC	获取价格	.050'' X .050 TERMINAL STRIP
FTSH-110-01-L-DV-EJM-P-TR	SAMTEC	获取价格	.050'' X .050 TERMINAL STRIP
FTSH-110-01-L-DV-EJ-P	SAMTEC	获取价格	.050'' X .050 TERMINAL STRIP
FTSH-110-01-L-DV-EJ-P-TR	SAMTEC	获取价格	.050" X .050 TERMINAL STRIP

与FTSH-110-01-L-DV-EJ-A相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

22
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

21
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

47
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

39

产品中心

服务支持

精选活动

关于我们

帮助中心

FTSH-110-01-L-DV-EJ-A

FTSH-110-01-L-DV-EJ-A 技术参数

FTSH-110-01-L-DV-EJ-A 数据手册

与FTSH-110-01-L-DV-EJ-A相关器件

与FTSH-110-01-L-DV-EJ-A相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

FTSH-110-01-L-DV-EJ-A

FTSH-110-01-L-DV-EJ-A 技术参数

FTSH-110-01-L-DV-EJ-A 数据手册

与FTSH-110-01-L-DV-EJ-A相关器件

与FTSH-110-01-L-DV-EJ-A相关文章

您还可以找

您在本页遇到什么问题？