Apr. 27, 2005
155Mbps SFP Transceiver
( For 15km~80km transmission )
Members of FlexonTM Family
Standard
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Compliant with SFP MSA
Compliant with ITU-T G.957 and G.958
Compliant with Telcordia GR-253-CORE
Compliant with FCC 47 CFR Part 15, Class B
Compliant with FDA 21 CFR 1040.10 and
1040.11, Class I
Description
Features
Fiberxon 155Mbps SFP transceiver is high
performance, cost effective module that supports
data-rate of 155Mbps and transmission distance
from 15km to 80km.
ꢀ
ꢀ
Up to 155Mbps data-rate
1310nm FP laser and PIN photodetector for
15km and 40km transmission
ꢀ
ꢀ
1550nm uncooled DFB laser and PIN
photodetector for 80km transmission
Standard serial ID information compliant with
SFP MSA
The transceiver consists of two sections: The
transmitter section incorporates a FP or uncooled
DFB laser, and the receiver section consists of a
PIN photodiode integrated with a trans-impedance
preamplifier (TIA). All modules satisfy class I laser
safety requirements.
ꢀ
ꢀ
ꢀ
ꢀ
SFP MSA package with duplex LC connector
Very low EMI and excellent ESD protection
+3.3V single power supply
Operating case temperature:
Standard : 0 to +70°C
The optical output can be disabled by a TTL logic
high-level input of Tx Disable. Tx Fault is provided to
indicate that degradation of the laser. Loss of signal
(LOS) output is provided to indicate the loss of an
input optical signal of receiver.
Industrial : -40 to +85°C
Applications
ꢀ
ꢀ
ꢀ
SDH STM-1, S-1.1, L-1.1, L-1.2
SONET OC-3 IR1, LR1, LR2
Other optical links
The standard serial ID information compliant SFP
MSA describes the transceiver’s capabilities,
standard interfaces, manufacturer and other
information. The host equipment can access this
information via the 2-wire serial CMOS EEPROM
protocol. For further information, please refer to SFP
Multi-Source Agreement (MSA).
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 1 of 11