NOTES:
FTE-1XX-XX-X-DV-XX-XX
REVISION BH
C
1.
REPRESENTS A CRITICAL DIMENSION.
OPTIONS
No OF POSITIONS
2. MAXIMUM CUT FLASH: .010 [0.25]
-P: PICK AND PLACE PAD (SEE FIG 2, SHT 2)
(ONLY AVAILABLE FOR 08-90 POSITIONS)
(USE PPP-37)
3. MINIMUM PUSHOUT FORCE: 1 LB
-05 THRU -90
4. SHEAR TAILS TO DIMENSION SHOWN.
5. MAXIMUM BURR: .003 [0.08]
(PER ROW)
DO NOT
SCALE FROM
THIS PRINT
( USE PPP-37-NT FOR TAPE & REEL)
-TR: TAPE & REEL PACKAGING
(USE PPP-37-NT ONLY)
LEAD STYLE
-01: .075 POST
6. MAXIMUM COPLANARITY:
-05 THRU -49 = .004 [0.10]
-50 THRU -64 = .006 [0.15]
(USE T-1S29-04-X-2 FOR HAND FILL,
T-1S29-02-X-2 FOR MACHINE FILL).
-A: ALIGNMENT PIN (MOLDED OR STAKED)
[ SAMTEC DISCRETION ON WHICH
-A PIN USED]
-65 THRU -90 = .009 [0.22]
7. FOR -XX POSITION ASSEMBLY USE -XX POSITION
BODY EXCEPT AS LISTED IN TABLE 2.
-02: .175 POST
(USE T-1S29-04-X-2 FOR HAND FILL,
T-1S29-02-X-2 FOR MACHINE FILL).
(MOLDED 4 POS MIN, SEE FIG 6, SHT 2)
(USE FTE-90-D-XX)
8. IF -A CALLED OUT ON ASSEMBLY, USE -A ON END OF BODY CALLOUT.
USE FTE-190-0X-G-DV-SA FOR STOCK THAT WILL BE CUT FOR STAKED -A ORDERS.
USE FTE-190-0X-G-DV FOR ORDERS NOT REQUIRING STAKED -A OPTION.
9. MAXIMUM ATTACHED FLASH ALLOWED ON POST SIDE ONLY: .02 [0.5]
10. -ES MOLDED OPTION ONLY, DURING CUT PROCESS, WALL MUST BE A MINIMUM
OF .004" OR COMPLETELY REMOVED.
-03: .120 POST
(STAKED 7 POS MIN, SEE FIG 5, SHT 2)
(USE FTE-90-D-A)
(USE T-1S29-04-X-2 FOR HAND FILL,
T-1S29-02-X-2 FOR MACHINE FILL).
-M: METAL PICK & PLACE PAD
USE MPP-17-5 (SEE FIG 9 - SHT 3)
(10 POS MIN, AVAILABLE IN -01 STYLE ONLY)
11. IF RETENTION IS BELOW SPECIFICATION, A SUBSTITUTION OF FTE-90-D FOR FTE-90-D-A
PLATING SPEC
IS ACCEPTABLE.
FLEX SHROUD OPTIONS
(STYLE -01 ONLY)
-ES: END SHROUD
-G: 10µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
C
+.004[+0.10]
(No OF POS x .0315)
-.010[-0.25]
[SAMTEC DISCRETION ON WHICH -ES USED]
(SEE FIG 3, SHT 2 FOR SNAPPED-ON,
11 POSITIONS MIN)
.0157 0.399
"A"
ROW SPECIFICATION
.0315 0.800
-DV: DOUBLE ROW VERTICAL
(USE FTE-90-D-A)
180
02
(SEE FIG 8, SHT 2 FOR MOLDED,
5 POSITIONS PER ROW MIN, SEE TABLE 2)
-EC: END SHROUD WITH LOCKING CLIPS
(SEE FIG 7, SHT 2)
.1200 3.048
REF
C
L
(11 POSITIONS MIN)
-EP: END SHROUD WITH GUIDE POSTS
(SEE FIG 4, SHT 2)
SEE NOTE 11
(11 POSITIONS MIN)
01
179
MAX SWAY
2.5 MAX SWAY
(EITHER DIRECTION)
"A"
2
2
MAX SWAY
(EITHER DIRECTION)
(EITHER DIRECTION)
+.016
-.006
+0.41
T-1S29-XX-X-2
.0472
1.200
-0.15
C
SEE NOTE 9
.0120 0.305 SQ REF
.075 1.91
(CONTACT AREA)
C
"A"
90°±3°
(SEE TABLE 1)
C
.055 1.40 REF
.070 1.78
SEE NOTE 6
FTE-90-D
BURR SIDE
(SEE NOTE 4 & 5)
SEE NOTE 2
SEE NOTE 2
.18 4.6
SECTION "A"-"A"
FIG 1
FTE-1XX-03-X-DV SHOWN
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
ANGLES
2
.X:
.1 [2.5]
.XX: .01 [0.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
.XXX: .005 [0.13]
.XXXX: .0020 [0.051]
SHEET SCALE: 4:1
MATERIAL:
DO NOT SCALE DRAWING
INSULATOR: BLACK, LCP, UL 94 VO
.8MM x 1.2MM C.L. TERMINAL STRIP ASSM.
DWG.
NO. FTE-1XX-XX-X-DV-XX-XX
TERMINAL: PHOS BRONZE
BY: DEAN P
9/01/2009
SHEET 1 OF 3
F:\DWG\MISC\MKTG\FTE-1XX-XX-X-DV-XX-XX-MKT.SLDDRW
5秒后页面跳转
英伟达新AI芯片Rubin或提前半年亮相
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
