March 2011
FSL136HR
Green Mode Fairchild Power Switch (FPS™)
Features
Description
The FSL136HR integrated Pulse Width Modulator
(PWM) and SenseFET is specifically designed for high-
performance offline Switch-Mode Power Supplies
(SMPS) with minimal external components. FSL136HR
includes integrated high-voltage power switching
.
.
Internal Avalanche-Rugged SenseFET (650V)
Under 50mW Standby Power Consumption at
265VAC, No-load Condition with Burst Mode
.
Precision Fixed Operating Frequency with
Frequency Modulation for Attenuating EMI
regulators
that
combine
an
avalanche-rugged
SenseFET with a current-mode PWM control block.
.
.
.
.
Internal Startup Circuit
The integrated PWM controller includes: Under-Voltage
Lockout (UVLO) protection, Leading-Edge Blanking
(LEB), a frequency generator for EMI attenuation, an
optimized gate turn-on/turn-off driver, Thermal
Shutdown (TSD) protection, and temperature-
compensated precision current sources for loop
compensation and fault protection circuitry. The
FSL136HR offers good soft-start performance. When
compared to a discrete MOSFET and controller or RCC
switching converter solution, the FSL136HR reduces
total component count, design size, and weight; while
increasing efficiency, productivity, and system reliability.
This device provides a basic platform that is well suited
for the design of cost-effective flyback converters.
Built-in Soft-Start: 20ms
Pulse-by-Pulse Current Limiting
Various Protections: Over-Voltage Protection
(OVP), Overload Protection (OLP), Output-Short
Protection (OSP), Abnormal Over-Current
Protection (AOCP), Internal Thermal Shutdown
Function with Hysteresis (TSD)
.
.
.
.
Auto-Restart Mode
Under-Voltage Lockout (UVLO)
Low Operating Current: 1.8mA
Adjustable Peak Current Limit
Applications
Maximum Output Power(1)
.
.
.
SMPS for VCR, STB, DVD, & DVCD Players
SMPS for Home Appliance
Adapter
230VAC ± 15%(2)
85-265VAC
Open
Frame
Open
Frame
Adapter(3)
Adapter(3)
14W
Related Resources
19W
26W
20W
Notes:
.
AN-4137-Design Guidelines for Off-line Flyback
Converters Using FPS™
1. The junction temperature can limit the maximum
output power.
2. 230VAC or 100/115VAC with doubler.
3. Typical continuous power in a non-ventilated
enclosed adapter measured at 50C ambient.
.
AN-4141-Troubleshooting and Design Tips for
Fairchild Power Switch (FPS™) Flyback
Applications
.
AN-4147-Design Guidelines for RCD Snubber of
Flyback
Ordering Information
Operating
Temperature Range
Part Number
Top Mark
Package
Packing Method
FSL136HR
-40 to 105°C
FSL136HR 8-Lead, Dual Inline Package (DIP)
Rail
© 2011 Fairchild Semiconductor Corporation
FSL136HR • Rev. 1.0.0
www.fairchildsemi.com