RESISTORSꢀCAPACITORSꢀCOILSꢀDELAY LINES
FAILSAFE FUSE RESISTORS
1/2 WATT to 50 WATT
RCD
Term.W is
RoHS
compliant
& 260°C
compatible
RoHS
FR SERIES
Precision Grade Fuse Resistors!
RCD’s FR Series was designed to obtain the best from two devices. It
combines the performance of a precision grade resistor with precisely
controlled fusing characteristics. Typical applications include protection
for zener diodes and other semiconductor components, emitter
resistors for current sharing transistors, Squib circuits, and/or other
circuits that require precision fusing chracteristics unobtainable with
traditional fuses.
ꢀ Precision performance, flameproof design per UL94V-0
ꢀ Fusing-to-Operating current ratios as low as 3:1!
ꢀ Fusing times available from 1 millisecond to 30 seconds
ꢀ Available on exclusive SWIFTTM delivery program
ꢀ Custom design available for increased surge capability
(specify Option P)
ꢀ Also available: Hi-Rel screening, burn-in, custom marking, etc.
Please note that due to the inherent compromise involved between
resistive vs. fusing performance it is recommended that prior consulta-
tion be made with RCD’s engineering department to obtain the optimum
design. Parts intended for high-reliability applications are available
with burn-in (opt. ER) and/or military screening.
|←
L
→|
↓
↑
d
↓
↑
|← 1.0” [25.4] min.→|
SPECIFICATIONS
D
PERFORMANCE CHARACTERISTICS
RCD
Type*
FR1/2
Resistance
Range
Wattage
Tolerance
5% standard, 0.1-10% available
L ±.04 [1] D±.02 [.5] d typ
@25°C(W25)
Temperature
Coefficient (typ)
±100ppm 0.1-.9Ω, ±50ppm 1Ω &up,
0.5
1.0
2.0
3.5
5.5
.06Ω to 500Ω .29 [7.4] .125 [3.2] .020 [.5]
0.1Ω to 1.5K .60 [15.2] .130 [3.3] .020 [.5]
0.1Ω to 2K .69 [17.5] .170 [4.3] .032 [.8]
0.1Ω to 3K .58 [14.7] .230 [5.8] .032 [.8]
0.1Ω to 5K .984 [25] .323 [8.2] .032 [.8]
available to ±10ppm
FR1
FR2
FR3
FR5
Dielectric Strength
750 VAC
Insulation Resistance
1,000 megohms min. (dry)
Derate linearly from full rated power @
25°C to zero power @175°C (.67%/°C)
Derating
* Other sizes available up to 50 Watt on a custom basis.
FUSING CHARACTERISTICS: Standard FR resistors are designed to fuse within 10 seconds as follows:
FR1/2 to FR2 ≥1Ω = 20 x W25 (20 times the 25°C wattage rating), <1Ω = 40 x W25. FR3 & FR5 ≥5Ω = 25 x W25 , <5Ω = 50 x W25.
Faster fusing is available. Max. fault condition not to exceed 300x W25. Following chart depicts custom design capabilities.
Fusing
Minimum Resistance Value to Fuse in 1 Sec. or Less
Minimum Resistance Value to Fuse in 5 Sec. or Less
Current
(Amperes)
0.15
FR1/2
FR1
FR2
FR3
FR5
FR1/2
FR1
FR2
FR3
FR5
360Ω
120Ω
30Ω
7.5Ω
3.3Ω
720Ω
240Ω
60Ω
15Ω
7Ω
1.44K
480Ω
120Ω
30Ω
2.88K
960Ω
240Ω
60Ω
5.76K
1920Ω
480Ω
120Ω
53Ω
180Ω
60Ω
15Ω
3.8Ω
1.7Ω
360Ω
120Ω
30Ω
7.5Ω
3.3Ω
720Ω
240Ω
60Ω
15Ω
7Ω
1.44K
480Ω
120Ω
30Ω
2.88K
960Ω
240Ω
60Ω
0.25
0.5
1.0
1.5
13Ω
26Ω
13Ω
26Ω
2.0
3.0
5.0
2.0Ω
1.0Ω
0.5Ω
4Ω
2Ω
1Ω
8Ω
4Ω
2Ω
16Ω
8Ω
4Ω
32Ω
16Ω
8Ω
1.0Ω
0.5Ω
.25Ω
2Ω
1Ω
.5Ω
4Ω
2Ω
1Ω
8Ω
4Ω
2Ω
16Ω
8Ω
4Ω
10
15
20
0.25Ω
0.15Ω
0.1Ω
.5Ω
.3Ω
.2Ω
1Ω
.6Ω
.4Ω
2Ω
1.2Ω
.8Ω
4Ω
2.4Ω
1.6Ω
.13Ω
.08Ω
.06Ω
.25Ω
.15Ω
.10Ω
.5Ω
.3Ω
.2Ω
1Ω
.6Ω
.4Ω
2Ω
1.2Ω
.8Ω
APPLICATION & DESIGN NOTES:
P/NDESIGNATION:
FR1
- 101 - J B
W
1. Fusing current should be ≥ 4 times the continuous current for best performance.
2. Resistors reach elevated temperatures prior to opening- elevate body above the PCB.
3. Exercise care when testing fuse resistors.
4. RCD can custom manufacture fuse resistors from 1/8W to 50W per customer req’t.
Design objectives are achieved by element material (wirewound or film), insulation
(silicone, ceramic, epoxy), and process (alloy & resistor geometry).
5. Thermal fuses are also available and are designed to “blow” when the resistor body or
the ambient temperature reaches preset temperature (110°C to 240°C).
6. Custom surge-tolerant fuses are designed not to “blow” due to short term voltage
transients, lightning surges, or capacitor discharges, but will fuse under longer term
overloads. Consult factory for details.
7. Please include the following information when customized design is required:
Continuous wattage or current; ambient temperature; fusing wattage or current;
minimum and maximum “blow” times; resistance value & tolerance; max. size; voltage
level, AC or DC, wave form, & frequency; and a general description of the application.
Include info as to any pulse or overload conditions that the resistor must withstand.
RCD Type
Options: P, ER (additional options to
be assigned by RCD, leave blank if std)
Resis. Code: ≤1%: 3 signif. figures & multiplier,
e.g. R100= 0.1Ω, 1R00= 1Ω,1000= 100Ω, 1001= 1KΩ.
Resis. Code 2% - 10%: 2 signif. figures & multiplier,
e.g. R10= 0.1Ω, 1R0= 1Ω,100= 10Ω, 102= 1KΩ.
Tolerance: K=10%, J=5% (std), H=3%, G=2%,
F=1%, D=0.5%, C=0.25%, B=0.1%
Packaging: B= Bulk, T= T&R
Optional Temp. Coef: (leave blank if standard)
10 = 10ppm, 25 = 25ppm, 50 = 50ppm, 101=100pm
Termination: W= Lead-free, Q= Tin/Lead
(leave blank if either is acceptable)
-
-
-
-
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com
FA062A Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
80
5秒后页面跳转
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
AMD宣布全球裁员约1000人，调整战略聚焦增长
英伟达新AI芯片Rubin或提前半年亮相
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
