DATA SHEET
www.onsemi.com
IntelliMAXt Advanced Load
Products
Pin 1
(Bottom)
(Top)
FPF1007 - FPF1009
WDFN6 2x2, 0.65P
CASE 511CY
General Description
The FPF1007/8/9 are low R P−Channel MOSFET load switches
DS
offered in a selection of 10 ms, 80 ms, and 1 ms slew rate turn−on
options for transient / in−rush current control. To support trends in
mobile application requirements, the minimum operating input
voltage has been reduced down to 1.2 V, the input current leakage has
been minimized to extend battery life, and the ESD−protection has
been designed to withstand a minimum of 8 kV (HBM) and 2 kV
(CDM).
MARKING DIAGRAM
&E&E&Y
&Oxxx&C
&.&O&E&V
The switch is controlled by an active−high logic input (ON pin),
allowing direct interface with a low−voltage control signal. An
internal ON pin pull−down resistor protects against unintentional
device turn−on in the initial state. An on−chip pull−down resistor on
the output is enabled when the switch is turned−off and provides
quick, robust discharge of the output load.
&E
&Y
&O
xxx
&C
&.
= Designates Space
= Binary Calendar Year Coding Scheme
= Plant Code identifier
= Device Specific Code
= Single digit Die Run Code
= Pin One Dot
&V
= Eight−Week Binary Datecoding Scheme
Features
• 1.2 to 5.5 V Input Voltage Range
• Typical R = 30 mW at V = 5.5 V
ORDERING INFORMATION
See detailed ordering and shipping information on page 10
of this data sheet.
ON
IN
• Typical R = 40 mW at V = 3.3 V
ON
IN
• Fixed Three Different Turn−on Rise Time 10 ms / 80 ms / 1 ms
• Low < 10 mA at V = 3.3 V Quiescent Current
IN
• Internal ON Pin Pull Down
• Output Discharge Function
• ESD Protection above 8000 V HBM and 2000 V CDM
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Applications
• PDAs
• Cell Phones
• GPS Devices
• MP3 Players
• Digital Cameras
• Peripheral Ports
• Hot−Swap Supplies
• Notebook Computers
© Semiconductor Components Industries, LLC, 2008
1
Publication Order Number:
May, 2022 − Rev. 4
FPF1007/D