IEC Inlet Filters FN 9244
DATASHEET
Excellent Performance EMC/EMI Filter
Superior attenuation performance
Approvals & Compliances
Optional earth line choke
Complies with IEC/EN 60601-1
Snap-in versions (S and S1 type)
Hot inlet versions (HI type)
(CQC except HI-types)
Performance indicators
The FN 9244 IEC inlet filter combines an IEC inlet and
mains filter with superior filter attenuation in a small
form factor. Choosing the FN 9244 product line
brings you the rapid availability of a standard filter
associated with the necessary safety acceptances.
Standard IEC connector filters are a practical solution
helping you to pass EMI system approval in a short
time. A wide selection on amperage ratings, output
connections, mounting possibilities and filters for
medical applications are designed to offer you the
desired solution.
Features and benefits
Technical specifications
Exceptional conducted attenuation performance,
based on chokes with high saturation resistance
and excellent thermal behavior
250 VAC, 50/60 Hz
DC to 400 Hz
Maximum continuous operating voltage
Operating frequency
Rear/front or snap-in mounting
1 to 15 A @ 50°C max.
Rated currents
Standard or wide mounting flange
1 to 10 A (ENEC, CQC)
1 to 15 A (UL, CSA)
Approvals by rated current
FN 9244 B versions comply with the requirements of
1MOP acc. to IEC/EN 60601-1 for creepage and
clearance, leakage current and high potential
testing
P –> PE 2000 VAC for 2 sec (standard types)
P –> PE 2500 VAC for 2 sec (B types)
P –> N 1000 VAC for 2 sec
High potential test voltage
IP 40 according to IEC 60529
-25°C to +85°C (25/85/21)
Protection category
Optional earth line choke see FN 9244 E data sheet
Custom-specific versions are available on request
Temperature range (operation and storage)
Design corresponding to
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
UL 94 V-2 or better
Flammability corresponding to
MTBF @ 40°C/230 V (Mil-HB-217F)
Typical applications
≤8 A: 2,035,000 hours
≤15 A: 1,035,000 hours
Portable electrical and electronic equipment
Small to medium-sized machines and household
equipment
Single-phase power supplies, switch-mode power
supplies
Test and measurement equipment
Medical devices (MDD)
In-vitro diagnostic medical devices (IVDD)
Rack mounting equipment
Typical electrical schematic