Datasheet > FMH-461F

FMH-461F

更新时间： 2024-01-04 21:34:30

品牌	Logo	应用领域
CRANE		输入元件 LTE
页数	文件大小	规格书
9页	311K
描述
EMI INPUT FILTER 28 VOLT INPUT

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

FMH-461F 技术参数

生命周期：	Transferred	Reach Compliance Code：	unknown
风险等级：	5.57	Base Number Matches：	1

FMH-461F 数据手册

FEATURES

FMH EMI FILTER

1.5 AMP

EMI INPUT

28 VOLT

ILTER

NPUT

• –55°C to +125°C operation

• 50 dB minimum attenuation

at 500 kHz

• Compliant to MIL-STD-461C, CE03

• Compatible with MIL-STD-704E

DC power bus

MODEL

FMH-461

1.5 amp

Size (max.): Non-flanged, case E3

1.460 x 1.130 x 0.330 (37.08 x 28.70 x 8.38 mm)

Flanged, case G3

2.005 x 1.130 x 0.330 inches (50.93 x 28.70 x 8.38 mm)

See Section B8, cases E3 and G3, for dimensions.

22 grams typical, 28 grams maximum

Weight:

Screening: Standard, ES, or 883 (Class H). See Section C2 for screening

options, see Section A5 for ordering information.

DESCRIPTION

Interpoint specifically designed the FMH-461™ EMI filter to reduce

the input line reflected ripple current of the following high frequency

DC/DC converters: MHD, MHF, MHF+, MHV, MSA , and MTR

series converters. It will also reduce EMI for several of Interpoint’s

lower frequency converters: MHE/MLP, MHL, MTO, and MTW

series. The FMH-461 filter is ideal for use in applications which must

meet MIL-STD-461C levels of conducted and radiated emissions.

Throughput current is 1.5 amps. At 16 VDC input (low line), the filter

provides 24 watts of throughput power.

FILTER OPERATION

FMH-461 filters are rated for full power operation from –55°C to

+125°C baseplate temperature. Operation is offered up to the

absolute maximum of +135°C with derating as defined in

“Recommended Operating Conditions” on the following page. The

maximum DC insertion loss at full load and nominal input voltage

(28 VDC) represents a power loss of less than 2%.

LAYOUT REQUIREMENTS

The case of the filter must be connected to the case of the converter

through a low impedance connection to minimize EMI.

MIL-STD NOISE MANAGEMENT

When used in conjunction with Interpoint converters, the FMH-461

EMI filter reduces input ripple current by 35 dB or greater at 200 kHz

and by at least 50 dB at 500 kHz (see Figures 5 and 6 and electrical

characteristics table). This attenuation gives the converter/filter

combination performance which exceeds MIL-STD-461C’s CE03

test.

1. MSA models may require an inductor in series with the MSA’s positive input.

2 µH is the suggested value.

B3-17

12 3 4 5 6 7...9

中文翻译

下载PDF

与FMH-461F相关器件

型号	品牌	获取价格	描述	数据表
FMH-461F/883	CRANE	获取价格	EMI INPUT FILTER 28 VOLT INPUT
FMH-461F/883	CRANE	获取价格	EMI INPUT FILTER 28 VOLT INPUT
FMH47N60S1	FUJI	获取价格	TO-3P(Q)
FMH47N60S1FD	FUJI	获取价格	TO-3P（Q）
FMH60N190S2HF	FUJI	获取价格	TO-3P(Q)
FMH60N280S2HF	FUJI	获取价格	TO-3P(Q)
FMH6E0823J02L	KYOCERA AVX	获取价格	DC Filtering MPF Capacitor
FMH6E0823K02L	KYOCERA AVX	获取价格	DC Filtering MPF Capacitor
FMH6E0823M02L	KYOCERA AVX	获取价格	DC Filtering MPF Capacitor
FMH6K0823J02L	KYOCERA AVX	获取价格	DC Filtering MPF Capacitor