Preliminary
FM24C04C
4Kb Serial 5V F-RAM Memory
Features
Low Power Operation
4K bit Ferroelectric Nonvolatile RAM
5V operation
100 A Active Current (100 kHz)
4 A (typ.) Standby Current
Organized as 512 x 8 bits
High Endurance 1012 Read/Writes
36 Year Data Retention at +75C
NoDelay™ Writes
Industry Standard Configuration
Advanced High-Reliability Ferroelectric Process
Industrial Temperature -40 C to +85 C
8-pin “Green”/RoHS SOIC (-G)
Fast Two-wire Serial Interface
Up to 1 MHz maximum bus frequency
Direct hardware replacement for EEPROM
Supports legacy timing for 100 kHz & 400 kHz
Description
Pin Configuration
The FM24C04C is a 4-kilobit nonvolatile memory
employing an advanced ferroelectric process. A
ferroelectric random access memory or FRAM is
nonvolatile and performs reads and writes like a
RAM. It provides reliable data retention for 36 years
while eliminating the complexities, overhead, and
system level reliability problems caused by EEPROM
and other nonvolatile memories.
1
8
7
6
5
NC
VDD
WP
2
A1
3
A2
SCL
SDA
4
VSS
The FM24C04C performs write operations at bus
speed. No write delays are incurred. Data is written to
the memory array in the cycle after it has been
successfully transferred to the device. The next bus
cycle may commence immediately without the need
for data polling. The FM24C04C is capable of
supporting 1012 read/write cycles, or a million times
more write cycles than EEPROM.
Pin Names
A1-A2
SDA
Function
Device Select Address 1 and 2
Serial Data/Address
Serial Clock
SCL
WP
VSS
VDD
Write Protect
Ground
Supply Voltage
These capabilities make the FM24C04C ideal for
nonvolatile memory applications requiring frequent
or rapid writes. Examples range from data collection
where the number of write cycles may be critical, to
demanding industrial controls where the long write
time of EEPROM can cause data loss. The
combination of features allows more frequent data
writing with less overhead for the system.
Ordering Information
FM24C04C-G
FM24C04C-GTR
“Green”/RoHS 8-pin SOIC
“Green”/RoHS 8-pin SOIC,
Tape & Reel
The FM24C04C provides substantial benefits to users
of serial EEPROM, yet these benefits are available in
a hardware drop-in replacement. The FM24C04C is
available in an industry standard 8-pin SOIC package
and uses
a
familiar two-wire protocol. The
specifications are guaranteed over the industrial
temperature range from -40°C to +85°C.
This is a product that has fixed target specifications but are subject
to change pending characterization results.
Ramtron International Corporation
1850 Ramtron Drive, Colorado Springs, CO 80921
(800) 545-FRAM, (719) 481-7000
www.ramtron.com
Rev. 1.1
June 2011
Page 1 of 12