AC FILTERING
FLA* RoHS Compliant
The FLA series uses metallized polypropylene dielectric, aluminum can,
impregnated with soft PU specially treated to have a very high dielectric
strength in operating conditions up to 85°C.
The FLA has been designed with overpressure disconnected device.
They are suitable for output AC filtering for power converters, UPS
systems, solar inverters and motor drives etc.
APPLICATIONS
• The FLA capacitor is particularly designed for AC filtering.
HOT SPOT CALCULATION
See Hot Spot Temperature, page 70.
θhot spot = θambient + (Pd + Pt) x Rth
with Pd (Dielectric losses) = Q x tgδ0
Q x tgδ0 [ ½ x Cn x (Vpeak to peak)2 x f ] x tgδ0
tgδ0 (tan delta)
For polypropylene, tgδ0 = 2 x 10-4 for frequencies
up to 1MHz and is independent of temperatures.
2
Pt (Thermal losses) = Rs x (Irms
)
where
Cn in Farad
I
rms in Ampere f in Hertz
V in Volt
Rs in Ohm θ in °C
R
th in °C/W
WORKING TEMPERATURE
According to the power to be dissipated
-40°C to +85°C
LIFETIME EXPECTANCY
One unique feature of this technology (as opposed to aluminum
electrolytics) is how the capacitor reacts at the end of its lifetime.
PACKAGING MATERIAL
• Aluminium can with soft PU
Unlike aluminum electrolytic film capacitors do not have a catastrophic
failure mode. Film capacitors simply experience a parametric loss of
capacitance of about 5% from initial value, with no risk of short circuit.
STANDARDS
IEC 61071-1, IEC 61071-2: Power electronic capacitors
EN CYWT2.E514025 Certificate: E514025 (approved by UL)
The capacitor continues to be functional even after this 5% decrease.
HOW TO ORDER
FLA
A1
6
V
0606
K
C
Series
Case
Dielectric
Voltage
A = 250V
H = 330V
L = 450V
M = 480V
J = 550V
R = 600V
N = 660V
O = 690V
P = 850V
Capacitance
Tolerances
J = ±5%
K = ±10%
Terminal Code
F = Fast-on terminals
H = M8 screw terminals
6 = Polypropylene
EIA Code
A1-A2
B1-B4
C1
0606 = 60uF
D1
E1-E8
F1-F5
G1-G6
H1-H2
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.
119
TDS-MDPWR-0016 | Rev 1
medium power film capacitors
–
–