F-213 SUPPLEMENT
(1,27 mm) .050"
FHSC SERIES
FHSC–125–15.00–SEU–TTR
FHSC–115–10.00–TTL–SED
HIGH SPEED CABLE ASSEMBLIES
Uses
Header or Socket
Termination
38 AWG
micro ribbon
coax cable
–TXX Mates with:
SPECIFICATIONS
SFM
For complete specifications
–SXX Mates with:
TFM
see www.samtec.com?FHSC
Cable:
38 AWG coax
micro ribbon
Signal Routing:
50Ω Single-Ended
Overall Length:
(152 mm) 6" to
(1 m) 40" standard
Cable Flexing Life:
>40,000 cycles
Cable Bending Radius:
APPLICATION
SPECIFIC
• Other wire AWG
• Hot plugging
• Other lengths
• Other terminations
• Other sizes
<2,5 mm
Rated @ 3dB
Plating:
Cable
Insertion Loss
Au over 50µ" (1,27 µm) Ni
Current Rating:
300 millamp per contact max
Propagation Delay:
4.5 nsec/meter
Length
FHSC
10" (254 mm)
175 MHz / 0.35 Gbps
Performance and complete test data
available at www.samtec.com?FHSC
or contact sig@samtec.com
Contact Samtec
Operating Temp Range:
-40°C to +105°C
RoHS Compliant:
Yes
(1,27 mm)
.050" pitch
Surface or
Edge Mount (socket only)
APPLICATION
END
NO. 1
NO. POSITIONS
PER ROW
WIRE
LENGTH
END
NO. 2
WIRING
OPTION
(10,87)
.428
FHSC
1
Processing conditions will
affect mated height.
Specify
END ASSEMBLIES
from chart
–1
= Pin 1 to
Pin 1
= Wire Length
in Inches
(44,45 mm) 01.75"
minimum
END TO END
L
05, 10, 15, 20, 25, 30
(Call for other sizes)
(15,24) .600
(19,81) .780
(24,38) .960
–SM to –SM
–SM to –EM
–EM to –EM
–2
= Pin 1 to
Pin 2
OAL = Wire Length + L
Wire Length (1,27) .050
SURFACE MOUNT
–3
Important Note:
01
02
ASSEMBLY
END 1
END 2
= Pin 1 to
Second
Last Pin
For optimal performance,
30
30
at least one transmission line
–TTR =Terminal,
Top, Notch Right
–TTL = Terminal,
Top, Notch Left
must be dedicated to ground.
For more information, go to
www.samtec.com/cable_
30
30
–4
builder/xhsc_grounding.aspx
–TBR = Terminal,
= Pin 1 to
Last Pin
Bottom, Notch Right
NO. OF
Note:
Contact Samtec
for high speed
characterization.
30
30
30
30
A
POSITIONS
–05
–TBL = Terminal,
Bottom, Notch Left
–STR = Socket,
Top, Notch Right
–STL = Socket,
Top, Notch Left
(20,37) .802
(28,37) 1.117
(32,39) 1.275
(43,36) 1,707
(52,37) 2.062
(52,37) 2.062
30
30
30
30
A
–10
–15
–20
–25
Note:
WIRING REQUIREMENTS
Cable lengths
longer than
40.00" (1 meter)
are not
WIRING
END OPTIONS
–SBR = Socket,
OPTION
Bottom, Notch Right
30
30
TTR, TBL, STL, SBR, SED to
TTR, TBL, STL, SBR, SEU
or
TTL, TBR, STR, SBL, SEU to
TTL, TBR, STR, SBL, SED
02
–30
supported with
S.I. test data.
01 –SBL = Socket,
Bottom, Notch Left
30
30
1 or 2
*
END
(7,67)
.302
B
(10,24)
.403
(9,22)
.363
Note:
EDGE MOUNT
Verify part number with
Samtec’s Interactive
Cable Builder at
–TXX
–SXX
TTR, TBL, STL, SBR, SED to
TTL, TBR, STR, SBL, SED
or
TTL, TBR, STR, SBL, SEU to
TTR, TBL, STL, SBR, SEU
ASSEMBLY
END 1
END 2
*
B
3 or 4
30
30
–SEU = Socket,
Edge, Notch Up
www.samtec.com/
cable_builder/pitch.aspx
* Surface Mount End
Options only.
–SED = Socket,
END NO. 1
END NO. 2
Note:
Edge, Notch Down
30
30
This Series is non-standard,
non-returnable.
WWW.SAMTEC.COM