F-210-1 SUPPLEMENT
(1,27mm) .050"
FHSC SERIES
FHSC–125–15.00–SEU–TTR
FHSC–115–10.00–TTL–SED
HIGH SPEED CABLE ASSEMBLIES
Header or Socket
Termination
-TXX Mates with:
SPECIFICATIONS
Uses
SFM
38 AWG
micro ribbon
coax cable
For complete specifications
see www.samtec.com?FHSC
-SXX Mates with:
TFM
Cable:
38 AWG coax
micro ribbon
Signal Routing:
50Ω Single-Ended
Overall Length:
(152mm) 6" to
(1m) 40" standard
Cable Flexing Life:
>40,000 cycles
Cable Bending Radius:
<2,5mm
Plating:
Au over 50µ" (1,27µm) Ni
Current Rating:
300 millamp max
Propagation Delay:
4.5 nsec/meter
Operating Temp Range:
-40°C to +105°C
RoHS Compliant:
Yes
APPLICATION
SPECIFIC
• Other wire AWG
• Hot plugging
• Other lengths
• Other terminations
• Other sizes
Contact asp@samtec.com
Rated @ 3dB
Cable
Insertion Loss
Length
FHSC
10" (254mm)
175 MHz / 0.35 Gbps
Performance and complete test data
available at www.samtec.com?FHSC
or contact sig@samtec.com
(1,27mm)
.050"
pitch
Surface or
Edge Mount (socket only)
APPLICATION
END
NO. 1
NO. POSITIONS
PER ROW
WIRE
LENGTH
END
NO. 2
WIRING
OPTION
(10,87)
.428
FHSC
1
Processing conditions will
affect mated height.
Specify
END ASSEMBLIES
from chart
–1
= Pin 1 to
Pin 1
= Wire Length
in Inches
(152mm) 06.00"
minimum
END TO END
L
05, 10, 15, 20, 25, 30
(Call for other sizes)
(15,24) .600
(19,81) .780
(24,38) .960
–SM to –SM
–SM to –EM
–EM to –EM
–2
= Pin 1 to
Pin 2
OAL = Wire Length + L
Wire Length (1,27) .050
Important Note:
SURFACE MOUNT
–3
For optimal performance,
01
02
ASSEMBLY
END 1
END 2
at least one transmission line
= Pin 1 to
Second
Last Pin
must be dedicated to ground.
For more information, go to
www.samtec.com/cable_
builder/xhsc_grounding.asp
30
30
–TTR =Terminal,
Top, Notch Right
–TTL = Terminal,
Top, Notch Left
30
30
–4
–TBR = Terminal,
Note:
= Pin 1 to
Last Pin
NO. OF
POSITIONS
Bottom, Notch Right
30
30
Contact Samtec
30
30
A
for high
–TBL = Terminal,
Bottom, Notch Left
–STR = Socket,
Top, Notch Right,
–STL = Socket,
Top, Notch Left
speed
(20,37) .802
(28,37) 1.117
(32,39) 1.275
(43,36) 1,707
(52,37) 2.062
(52,37) 2.062
–05
–10
–15
–20
–25
–30
30
30
30
30
A
characterization.
Note:
Cable lengths
longer than
40.00" (1
WIRING REQUIREMENTS
WIRING
END OPTIONS
–SBR = Socket,
OPTION
meter) are not
supported with
S.I. test data.
Bottom, Notch Right
30
30
TTR, TBL, STL, SBR, SED to
TTR, TBL, STL, SBR, SEU
or
TTL, TBR, STR, SBL, SEU to
TTL, TBR, STR, SBL, SED
02
01
*
–SBL = Socket,
Bottom, Notch Left
30
30
1 or 2
*
END
B
(10,24)
.403
(9,22)
.363
(7,67)
.302
Note:
EDGE MOUNT
Verify part number with
Samtec’s Interactive
Cable Builder at
–TXX
–SXX
TTR, TBL, STL, SBR, SED to
TTL, TBR, STR, SBL, SED
or
TTL, TBR, STR, SBL, SEU to
TTR, TBL, STL, SBR, SEU
ASSEMBLY
END 1
END 2
B
3 or 4
30
30
–SEU = Socket,
Edge, Notch Up
www.samtec.com/
cable_builder/pitch.aspx
* Surface Mount End
Options only.
–SED = Socket,
END NO. 1
END NO. 2
Note:
Edge, Notch Down
30
30
This Series is non-standard,
non-returnable.
WWW.SAMTEC.COM