APPLICABLE STANDARD
OPERATING
STORAGE
-40 C TO 125 C(note 1)
50 V AC / DC
0.5 A
-10 CTO50C
(PACKEDCONDITION)
TEMPERATURE RANGE
TEMPERATURE RANGE
OPERATING OR STORAGE
HUMIDITY RANGE
RELATIVEHUMIDITY 90 %MAX(NOTDEWED)
RATING VOLTAGE
CURRENT
APPLICABLE CABLE
t=0.3±0.05mm, GOLD PLATING
HEAT RESISTANCE : 125℃
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
×
×
×
×
MARKING
CONFIRMED VISUALLY.
ELECTRICAL CHARACTERISTICS
CONTACT RESISTANCE 1mA(DC OR 1000Hz).
50 m MAX.
×
×
INCLUDING FPC,FFC BULK RESISTANCE
(L=8mm)
INSULATION
RESISTANCE
VOLTAGE PROOF
100 V DC.
500 M MIN.
×
×
×
×
150 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
MECHANICAL
OPERATION
20 TIMES INSERTIONS AND EXTRACTIONS.
① CONTACT RESISTANCE: 50 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
-
-
VIBRATION
SHOCK
FREQUENCY 10 TO 55 Hz, HALF AMPLITUDE
0.75 mm, FOR 10 CYCLES IN 3 AXIAL
DIRECTIONS.
① NO ELECTRICAL DISCONTINUITY OF
1 s.
② CONTACT RESISTANCE: 50 m MAX.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
981 m/s2 , DURATION OF PULSE 6 ms
AT 3 TIMES IN 3 BOTH AXIAL DIRECTIONS.
×
×
-
-
FPC RETENTION FORCE MEASURED BY APPLICABLE FPC.
(CONNECTOR,FPC AT INITIAL CONDITION.
DIRECTION OF INSERTION: 0.4×n N MIN
(note 2)
( n : NUMBER OF CONTACTS).
THICKNESS OF FPC SHALL BE t=0.30mm )
ENVIRONMENTAL CHARACTERISTICS
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE-55→+15TO+35→+125→+15TO+35C ① CONTACT RESISTANCE: 50 m MAX.
×
-
TIME
UNDER
30→ 2 TO
1000 CYCLES.
3
→ 30→ 2 TO 3 min. ② INSULATION RESISTANCE: 50 M MIN.
③ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
DAMP HEAT
(STEADY STATE)
EXPOSED AT
RELATIVE HUMIDITY
EXPOSED AT -10
RELATIVE HUMIDITY 90 TO 96 %,
10 CYCLES,TOTAL 240 h.
60±2 C,
×
×
-
-
90 TO 95 %,
TO +65 C,
1000 h.
DAMP HEAT,CYCLIC
① CONTACT RESISTANCE: 50 m MAX.
② INSULATION RESISTANCE: 1 M MIN.
(AT HIGH HUMIDITY)
③ INSULATION RESISTANCE: 50 M MIN.
(AT DRY)
④ NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
DRY HEAT
COLD
EXPOSED AT 125±2 C,
EXPOSED AT -55±3C,
1000 h.
1000 h.
① CONTACT RESISTANCE: 50 m MAX.
② NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
×
×
×
-
-
-
CORROSION SALT MIST EXPOSED AT 35±2 C 5% SALT WATER SPRAY
① CONTACT RESISTANCE: 50 m MAX.
② NO EVIDENCE OF CORROSION WHICH
AFFECTS TO OPERATION OF
CONNECTOR.
FOR 96 h.
SULPHUR DIOXIDE
EXPOSED AT 40±2 C , RELATIVE HUMIDITY
×
×
-
-
[JIS C 60068-2-42] 80±5% , 25±5 ppm FOR 96 h.
HYDROGEN SULPHIDE EXPOSED AT 40±2 C , RELATIVE HUMIDITY
[JIS C 60068-2-43] 80±5% , 10 TO 15 ppm FOR 96 h.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARK
APPROVED
CHECKED
DESIGNED
DRAWN
HS.SAKAMOTO
FN.TAMURA
18.03.15
18.03.15
18.03.15
18.03.15
NY.YAMASHIRO
NY.YAMASHIRO
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-382242-00-00
FH52K-**SB-1SH
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/2
CL580
FORM HD0011-2-1