Datasheet > FH34S

FH34S

更新时间： 2024-02-05 12:24:56

品牌	Logo	应用领域
广濑 - HRS		/
页数	文件大小	规格书
8页	368K
描述
0.5 mm Pitch, 1.0 mm above the board Top and Top/Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

FH34S 数据手册

0.5 mm Pitch, 1.0 mm above the board Top and Top/Bottom Contact, Back-Flip

actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

FH34(S)Series

Increased FPC/FFC holding force

Space saving (30 pos. shown)

Actuator

Metal fittings

1.0mm

3.2mm

Easy FPC/FFC insertion

Back opening rotating

All four

sides are

chamfered.

Top contacts

Ready to insert FPC/FFC

■Features

Delivered with

the actuator open

1. Low-profile

With the 1.0 mm above the board and width of 3.8 mm the

connectors are used in space saving applications.

2. Increased FPC/FFC retention

As compared with existing similar construction connectors:

* In horizontal direction: Approximately 2.6 times

* In vertical direction: Approximately 2 times

3. Unique Back-Flip rotating actuator

FPC

The rotating actuator opens from the back of the connector,

assuring reliable electrical and mechanical connection.

FPC/FFC inserted and retained.

Completed electrical and mechanical connection.

4. Easy FPC insertion and reliable electrical

connection

Proven Flip Lock actuator allows easy insertion of FPC and

provides a tactile sensation when fully closed, confirming

complete electrical and mechanical connection.

5. Delivered with the actuator open

FPC/FPC can be immediately inserted without the need

for the opening of the actuator.

6. Accepts standard FPC thickness

0.3mm thick standard Flexible Printed Circuit (FPC) can

be used. This is the only ultra-low profile ZIF connector

using standard FPC.

7. Compatible with existing connectors.

FPC/FFC and PCB mounting patterns are the same as for

the FH19SC Series (bottom contact), allowing the use of

both connectors for interconnections between two boards or

replacement of the connectors.

Compatible with existing connectors.(FH19SC SERIES)

8. Conductive traces on the PCB can run

under the connector

No exposed contacts on the bottom of the connector.

9. Board placement with automatic equipment

Flat upper surface and tape and reel packaging facilitate

vacuum pick-up and placement.

Standard reel packaging contains 5000 connectors.

10.Halogen-free^*

*As defined by IEC61249-2-21

Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm

maximum

2013.11w

12 3 4 5 6 7 8

中文翻译

下载PDF

与FH34S相关器件

型号	品牌	获取价格	描述	数据表
FH3-4S-1.25DS	HRS	获取价格	1.25mm Pitch FPC/FFC Connector
FH3-4S-1.25DS(01)	HRS	获取价格	Card Edge Connector, 4 Contact(s), 1 Row(s), Male, Right Angle, 0.049 inch Pitch, Solder T
FH3-4S-1.25DSA	HRS	获取价格	Card Edge Connector, 4 Contact(s), 1 Row(s), Straight, 0.049 inch Pitch, Solder Terminal,
FH3-4S-1.25DSA(01)	HRS	获取价格	Card Edge Connector, 4 Contact(s), 1 Row(s), Male, Straight, 0.049 inch Pitch, Solder Term
FH34S-11S-0.5SH	HRS	获取价格	0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P
FH34S-11S-0.5SH50	HRS	获取价格	0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P
FH34S-14S-0.5SH	HRS	获取价格	0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P
FH34S-14S-0.5SH50	HRS	获取价格	0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P
FH34S-16S-0.5SH	HRS	获取价格	0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P
FH34S-16S-0.5SH(50)	HRS	获取价格	Card Edge Connector, 16 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surfac

与FH34S相关文章

采用MCU+MPU双处理器架构实现的创新应用设计探索
2024-08-23

9
解读L9904TR手册资料：产品概述、主要功能、电气参数
2024-08-20

19
芯片底部填充工艺：提升电子设备可靠性的关键步骤
2024-08-14

83
REF03GPZ资料解读：主要特征、技术参数、应用场景
2024-08-05

143

产品中心

服务支持

精选活动

关于我们

帮助中心

FH34S

FH34S 数据手册

与FH34S相关器件

与FH34S相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

FH34S

FH34S 数据手册

与FH34S相关器件

与FH34S相关文章

您还可以找

您在本页遇到什么问题？