5秒后页面跳转
FH34S-26S-0.5SH50 PDF预览

FH34S-26S-0.5SH50

更新时间: 2024-11-18 12:03:27
品牌 Logo 应用领域
广濑 - HRS 连接器
页数 文件大小 规格书
12页 300K
描述
0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

FH34S-26S-0.5SH50 数据手册

 浏览型号FH34S-26S-0.5SH50的Datasheet PDF文件第2页浏览型号FH34S-26S-0.5SH50的Datasheet PDF文件第3页浏览型号FH34S-26S-0.5SH50的Datasheet PDF文件第4页浏览型号FH34S-26S-0.5SH50的Datasheet PDF文件第5页浏览型号FH34S-26S-0.5SH50的Datasheet PDF文件第6页浏览型号FH34S-26S-0.5SH50的Datasheet PDF文件第7页 
0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip  
actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
FH34(S)Series  
Increased FPC/FFC holding force  
Space saving (30 pos. shown)  
Actuator  
Metal fittings  
1.0mm  
3.2mm  
Easy FPC/FFC insertion  
Back opening rotating  
All four  
sides are  
chamfered.  
Top contacts  
Features  
1. Low-profile  
With the 1.0 mm above the board and width of 3.8 mm the  
connectors are used in space saving applications.  
Ready to insert FPC/FFC  
Delivered with  
the actuator open  
2. Increased FPC/FFC retention  
As compared with existing similar construction connectors:  
* In horizontal direction: Approximately 2.6 times  
* In vertical direction: Approximately 2 times  
3. Unique Back-Flip rotating actuator  
The rotating actuator opens from the back of the connector,  
assuring reliable electrical and mechanical connection.  
4. Easy FPC insertion and reliable electrical connection  
Proven Flip Lock actuator allows easy insertion of FPC and  
provides a tactile sensation when fully closed, confirming  
complete electrical and mechanical connection.  
FPC  
5. Delivered with the actuator open  
FPC/FFC inserted and retained.  
Completed electrical and mechanical connection.  
FPC/FPC can be immediately inserted without the need for the  
opening of the actuator.  
6. Accepts standard FPC thickness  
0.3mm thick standard Flexible Printed Circuit (FPC) can be used.  
This is the only ultra-low profile ZIF connector using standard  
FPC.  
7. Compatible with existing connectors.  
FPC/FFC and PCB mounting patterns are the same as for the  
FH19SC Series (bottom contact), allowing the use of both  
connectors for interconnections between two boards or replacement  
of the connectors.  
8. Conductive traces on the PCB can run under  
the connector  
No exposed contacts on the bottom of the connector.  
9. Board placement with automatic equipment  
Flat upper surface and tape and reel packaging facilitate vacuum  
pick-up and placement.  
Compatible with existing connectors.(FH19SC SERIES)  
Standard reel packaging contains 5000 connectors.  
10.Halogen-free*  
(FH34SJ,FH34SW,FH34SRJ)  
*As defined by IEC61249-2-21  
Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum  
2012.3  
1

与FH34S-26S-0.5SH50相关器件

型号 品牌 获取价格 描述 数据表
FH34S-30S-0.5SH HRS

获取价格

0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P
FH34S-30S-0.5SH50 HRS

获取价格

0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P
FH34S-32S-0.5SH HRS

获取价格

0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P
FH34S-32S-0.5SH(50) HRS

获取价格

Card Edge Connector, 32 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surfac
FH34S-32S-0.5SH50 HRS

获取价格

0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P
FH34S-34S-0.5SH HRS

获取价格

0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P
FH34S-34S-0.5SH50 HRS

获取价格

0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P
FH34S-4S-0.5SH HRS

获取价格

0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P
FH34S-4S-0.5SH50 HRS

获取价格

0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P
FH34S-6S-0.5SH HRS

获取价格

0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible P