NOTES:
FFTP-XX-X-XX.XX-01-X-X-X
REVISION P
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. ALL ASSEMBLIES TO BE 100 % ELECTRONICALLY TESTED
FOR SHORTS AND OPENS.
No OF POSITIONS
-02 THRU -25
OPTION
DO NOT
SCALE FROM
THIS PRINT
-R: REVERSED CONNECTOR
(SEE FIG 2)
3. ALL ASSEMBLIES TO BE 100 % HI-POT TESTED AT 630V.
4. TO BE MEASURED FROM BOND LINE.
5. PARTS TO BE PACKAGED PER THE IDC PACKAGING INSTRUCTIONS
OF THE PACKAGING MANUAL.
STANDARD POLARIZATION NOTCH
-N: POLARIZATION NOTCH
(NOT AVAILABLE IN -02 THRU -04)
(LEAVE BLANK FOR -02 THRU -04)
END ASSEMBLY
-D: DOUBLE END (SEE FIGS 1 & 2)
6. SI DATA AVAILABLE FOR STANDARD LENGTHS ONLY.
7. MAX CABLE LENGTH AVAILABLE WITHOUT FLAT:
RIBBONIZED SECTION IS 18.61 INCHES. CONTACT
SAMTEC FOR NUMBER OF FLAT SECTIONS IF LONGER
LENGTH IS REQUIRED.
ASSEMBLY LENGTH
PLATING OPTIONS
-LEAVE BLANK FOR STANDARD, USE
C-67-L
8. WHEN CUTTING CABLE TO LENGTH, CONDUCTORS
SHOULD NOT EXTEND PAST THE CABLE INSULATION,
EXTENDING LESS THAN 25% OF CABLE THICKNESS ON
CONSECUTIVE AND LESS THAN 50% OF THE CABLE
THICKNESS ON NON-CONSECUTIVE STRANDS IS
CONSIDERED A PROCESS INDICATOR.
ONLY AVAILABLE IN THESE LENGTHS
- 3.85" (USE CBTP-68-30-7/38-025-2)
- 8.77" (USE CBTP-68-30-7/38-025-1)
-18.00" (USE CBTP-68-30-7/38-025-4)
-S: USE C-67-S
-F: USE C-67-F
LEAD STYLE
9. FOR CONNECTOR ASSEMBLY SEE DRAWING FFSD-XX-XX-X-N-XXX-SUB.
-D: DOUBLE END
NOTCH DENOTES
FIRST POSITION
FIG 1
FFTP-10-D-3.85-01-X-N
C
RED WIRE TO SIDE
OF 1ST POS INDICATOR
.010 MAX
C
CABLE OVERHANG
XX.XX ±.225
.120 REF
.040 REF
BOND LINE
(NO OF POS x .050) + .165
.075
REF
REF
DETAIL 'A'
SCALE 2 : 1
.250+.150
-.100 (TYP)
C
(SEE NOTE 4)
SCALE 2:1
FFC-XX-D
+.006
-.003
.200
C
'A'
-R
FFS-XX-D
FIG 2
REVERSED CONNECTOR
FFTP-10-D-X.XX-01-X-N-R
(SAME AS FIG 1 EXCEPT AS SHOWN)
IN PROCESS
C
XX.XX±.125
(SEE TABLE 1)
C
+.150
-.100
.250
(SEE NOTE 4)
PROPRIETARY NOTE
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01 [.3]
.XXX: .005 [.13]
.XXXX: .0020 [.051]
SHEET SCALE: 1:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: CELANEX 3314, COLOR: BLACK
CONTACT OR TERMINAL: PHOS BRONZE
.050 X .050 C/L TWISTED PAIR FEMALE IDC ASSEMBLY
NO.
DFWGF. TP-XX-X-XX.XX-01-X-X-X
WIRE: 30 AWG, 7/38, TINNED, TWISTED PAIR WITH PVC
INSULATOR
LENNY K
3/16/07
SHEET 1 OF 1
BY:
F:\DWG\MISC\MKTG\FFTP-XX-X-XX.XX-01-X-X-X-MKT.SLDDRW