SEMICONDUCTOR
FC5754
TECHNICAL DATA
Standalone Linear Li-Ion Battery Charger with
Thermal Regulation in SOT-23-5 and E-SOP-8
General Description
Features
The FC5754 is a complete linear charger for single cell
lithium-ion batteries. With small SOT-23-5 package and
few external components, FC5754 is well suited for
portable applications. In addition, the FC5754 is
specifically designed to work within USB power
specifications.
Programmable charge current up to 1A
No MOSFET, sense resistor or blocking diode
required
Complete linear charger both in SOT-23-5 and
E-SOP-8 for single cell Lithium-ion batteries
Typical zero reverse current from battery
Thermal regulation maximizes charge rate
without risk of overheating
No external sense resistor and blocking diode are
required. Charging current can be programmed
externally with a single resistor. The built-in thermal
regulation facilitates charging with maximum power
without risk of overheating.
Charges single cell Li-ion batteries directly from
USB port
Act as a LDO when battery is removed
Preset 4.2V/4.35V charge voltage with ±1%
accuracy
The FC5754 always preconditions the battery with
1/10 of the programmed charge current at the
beginning of a charge cycle, until 40υs after it verifies
that the battery can be fast-charged. The FC5754
automatically terminates the charge cycle when the
charge current drops to 1/10th the programmed value
after the final float voltage is reached.
Automatic recharge
Charge status indicator
C/10 charge termination
45uA shutdown supply current
2.9V trickle charge threshold
Soft-start limits inrush current
RoHS compliant and Pb-free
The FC5754 consumes zero reverse current from the
battery at standby, shutdown and sleep modes. This
feature reduces the charge and discharge cycles on
the battery, further prolonging the battery life. The
FC5754 can also be used as a LDO when battery is
removed. Other features include shutdown mode,
charge current monitor, under voltage lockout,
automatic recharge and status indicator.
Applications
Wireless handsets
Hand-held instruments
Portable information appliances
Bluetooth application
Charging docks and cradles
Typical Application Diagram
Typical Performance Characteristics
Complete Charge Cycle (850mAh Battery)
LDO Mode
(Battery Removed)
580 mA Charger
Time (1000s/DIV)
2014. 11. 04
Revision No : 0
1/19