FAN53526
3.0 A, 2.4 MHz, Digitally
Programmable TinyBuck)
Regulator
Descriptions
www.onsemi.com
The FAN53526 is a step−down switching voltage regulator that delivers a
digitally programmable output from an input voltage supply of 2.5 V to 5.5 V.
The output voltage is programmed through an I2C interface capable of
operating up to 3.4 MHz.
Using a proprietary architecture with synchronous rectification, the
FAN53526 is capable of delivering 3.0 A continuous at over 80% efficiency,
maintaining that efficiency at load currents as low as 10 mA. The regulator
operates at a nominal fixed frequency of 2.4 MHz, which reduces the value of
the external components. Additional output capacitance can be added to
improve regulation during load transients without affecting stability.
At moderate and light loads, Pulse Frequency Modulation (PFM) is used to
operate in Power−Save Mode with a typical quiescent current of 50 mA at
room temperature. Even with such a low quiescent current, the part exhibits
excellent transient response during large load swings. At higher loads, the
system automatically switches to fixed−frequency control, operating at
2.4 MHz. In Shutdown Mode, the supply current drops below 1 mA, reducing
power consumption. PFM Mode can be disabled if fixed frequency is desired.
The FAN53526 is available in a 15−bump, 1.310 mm x 2.015 mm, 0.4 mm
ball pitch WLCSP.
WLCSP−15
CASE 567QS
MARKING DIAGRAM
1
2
K
Y
K
Z
Pin−1
Mark
X
1, 2
KK
= Two Alphanumeric Characters for
Device Mark
= Two Alphanumeric Characters for
Lot Rune Code Mark
.
= Pin 1 Indicator
X
Y
Z
= Alphabetical Year Code
= 2−weeks Date Code
= Assembly Plant Code
Features
• Fixed−Frequency Operation: 2.4 MHz
• Best−in−Class Load Transient
PIN CONFIGURATION
• Continuous Output Current Capability: 3.0 A
• 2.5 V to 5.5 V Input Voltage Range
• Digitally Programmable Output Voltage:
♦ −0.600 V to 1.39375 V in 6.25 mV Steps
• Programmable Slew Rate for Voltage Transitions
VIN
A1
SW
A2
PGND
A3
B1
B2
B3
PGND AGND
C2
2
• I C−Compatible Interface Up to 3.4 Mbps
C1
C3
• PFM Mode for High Efficiency in Light-Load
• Quiescent Current in PFM Mode: 50 mA (Typical)
• Input Under−Voltage Lockout (UVLO)
• Thermal Shutdown and Overload Protection
• 15−Bump Wafer−Level Chip Scale Package (WLCSP)
VSEL
D1
EN
D2
SDA
D3
AGND
E1
SCL
E2
VOUT
E3
Applications
• Application, Graphic, and DSP Processors
♦ ARMt, Tegrat, OMAPt, NovaThor,
ARMADAt, Kraitt, etc.
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
• Hard Disk Drives, LPDDR3, LPDDR4
• Tablets, Netbooks, Ultra−Mobile PCs
• Smart Phones
• Gaming Devices
© Semiconductor Components Industries, LLC, 2006
1
Publication Order Number:
December, 2017 − Rev. 4
FAN53526/D