April 2014
FAN48632
2.5 MHz, 2.0 A Pulsed-Load Synchronous TinyBoost™
Regulator with Bypass Mode for GSM PA Supply
Features
Description
.
Few External Components: 0.47 µH Inductor and
The FAN48632 allows systems to take advantage of new
battery chemistries that can supply significant energy when
the battery voltage is lower than the required voltage for
system power ICs. By combining built-in power transistors,
synchronous rectification, and low supply current; this IC
provides a compact solution for systems using advanced
Li-Ion battery chemistries.
0603 Case Size Input and Output Capacitors
Input Voltage Range: 2.35 V to 5.5 V
Fixed Output Voltage : 3.3 V, 3.5 V
.
.
.
Maximum Continuous Load Current of: 1.5 A
at VIN of 2.6 V
The FAN48632 is a boost regulator designed to provide a
minimum output voltage (VOUT(MIN)) from a single-cell Li-Ion
battery, even when the battery voltage is below system
minimum. In boost mode, output voltage regulation is
guaranteed to a maximum load current of 1.5 A continuous
and 2.0 A pulsed. Quiescent current in Shutdown Mode is less
than 3 µA, which maximizes battery life. The regulator
transitions smoothly between Bypass and normal Boost Mode.
The device can be forced into Bypass Mode to reduce
quiescent current.
.
Maximum Pulsed Load current :of 2.0 A for GSM 217 Hz
repetition rate ,boosting VOUT to 3.3 V or 3.5 V
.
.
.
.
.
.
.
.
.
Up to 96% Efficient
True Bypass Operation when VIN > Target VOUT
Internal Synchronous Rectifier
Soft-Start with True Load Disconnect
Forced Bypass Mode
VSEL Control to Optimize Target VOUT
Short-Circuit Protection
The FAN48632 is available in a 16-bump, 0.4 mm pitch,
Wafer-Level Chip-Scale Package (WLCSP).
VIN
VOUT
Low Operating Quiescent Current
16-Bump, 0.4 mm Pitch WLCSP
+
CIN
10F
Battery
COUT
40F
SYSTEM
LOAD
SW
PGND
AGND
PG
0.47H
Applications
FAN48632
VSEL
.
Boost for Low-Voltage Li-ion Batteries, Brownout
Prevention, Supply GSM RF PA.
EN
BYP
.
Cell Phones, Smart Phones, Tablets
Figure 1. Typical Application
Ordering Information
Output Voltage
VSEL0 / VSEL1
Forced
Bypass Temperature
Operating
Packing
Part Number
Soft-Start
Package
FAN48632UC33X
FAN48632BUC33X(1)
FAN48632UC35X
Note:
3.30 / 3.49
3.30 / 3.49
3.50 / 3.70
FAST
FAST
FAST
Low IQ
16-Ball, 4x4 Array, 0.4 mm
-40°C to 85°C Pitch, 250 µm Ball, Wafer-Level
Chip-Scale Package (WLCSP)
Tape
and
Reel
Low IQ
Low IQ
1. The FAN48632BUC33X includes backside lamination.
© 2013 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN48632 • Rev. 1.0.3