December 2017
FAN49103 — 2.5 A, 1.8 MHz, TinyPower™ I2C Buck-
Boost Regulator
Features
Description
.
.
.
.
.
24 µA Typical PFM Quiescent Current
Above 95% Efficiency
Total Layout Area = 11.61 mm2
Input Voltage Range: 2.5 V to 5.5 V
Maximum Continuous Load Current:
The FAN49103 is a high efficiency buck-boost switching
mode regulator which accepts input voltages either
above or below the regulated output voltage. Using full-
bridge architecture with synchronous rectification, the
FAN49103 is capable of delivering up to 2.5 A while
regulating the output at 3.4 V. The FAN49103 exhibits
seamless transition between step-up and step-down
modes reducing output disturbances. The output voltage
and operation mode of the regulator can be
programmed through an I2C interface.
-
-
-
3.0 A at VOUT=3.4 V, VIN=3.3 V
2.5 A at VOUT=3.4 V, VIN=3.0 V
2.0 A at VOUT=3.4 V, VIN=2.5 V
At moderate and light loads, Pulse Frequency
Modulation (PFM) is used to operate the device in
power-save mode to maintain high efficiency. In PFM
mode, the part still exhibits excellent transient response
during load steps. At moderate to heavier loads or
Forced PWM mode, the regulator switches to PWM
fixed-frequency control. While in PWM mode, the
regulator operates at a nominal fixed frequency of
1.8 MHz, which allows for reduced external component
values.
.
.
I2C Compatible Interface
Programmable Output Voltage:
-
2.8 V to 4.0 V in 25 mV Steps
.
.
1.8 MHz Fixed-Frequency Operation in PWM Mode
Automatic / Seamless Step-up and Step-down
Mode Transitions
.
Forced PWM and Automatic PFM/PWM Mode
Selection
The FAN49103 is available in a 20-bump 1.615 mm x
2.015 mm with 0.4 mm pitch WLCSP.
.
.
.
.
.
0.5 µA Typical Shutdown Current
Low Quiescent Current Pass-Through Mode
Internal Soft-Start and Output Discharge
Low Ripple and Excellent Transient Response
Internally Set, Automatic Safety Protections
(UVLO, OTP, SCP, OCP)
.
Package: 20 Bump, 0.4 mm Pitch WLCSP
Applications
.
.
.
.
.
Smart Phones
Tablets, Netbooks®, Ultra-Mobile PCs
Portable Devices with Li-ion Battery
2G/3G/4G Power Amplifiers
NFC Applications
Figure 1.
Typical Application
Ordering Information
Output
Discharge
Temperature
Range
Packing
Method
Device
Marking
Part Number
Package
FAN49103AUC340X
Yes
-40 to 85°C
20-Ball (WLCSP)
Tape and Reel
FF
© 2016 Semiconductor Components Industries, LLC.
FAN49103 • Rev.2
www.onsemi.com