EXQ50 Series
S i n g l e o u t p u t
DC/DC CONVERTERS 36-50W High Efficiency DC/DC Converters
1
• High efficiency topology, 90% at 5V and 86.5% typical at 1.8V
• Low profile, open-frame package
• Industry standard footprint
• Wide operating temperature, -40°C to +90°C
(with derating)
• 90% to 110% output trim
• No minimum load
• Remote on/off
EXQ50 series high-efficiency, open-frame, isolated DC/DC converters have an industry
standard quarter-brick footprint and a height of just 0.4 inches. The converters provide
up to 50 Watts of output power, are capable of delivering very high current at low
voltages, and offer exceptional power densities for today’s high-end applications. The
first four models in the series feature an input voltage range of 33 to 75VDC and are
available with output voltages of 5.0V, 3.3V, 2.5V or 1.8V. The output voltage of each
model is adjustable from 90% to 110% of its nominal value. Typical efficiencies are
90% for the 5V model, 89% for the 3.3V, 88% for the 2.5V and 86.5% for the 1.8V. All
EXQ50 series converters have a remote on/off capability, and are fully protected against
over-voltage, over-temperature and short-circuit conditions. Featuring full international
safety approval, including EN60950 (TÜV Product Service) and UL/cUL 60950, EXQ50
series converters reduce compliance costs and time to market.
TÜV
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
SPECIFICATIONS
OUTPUT SPECIFICATIONS
EMC CHARACTERISTICS
Total error
(See Note 8)
4.5%
±2.0% max.
0.3% max.
0.3% max.
90% to 110%
10%
Conducted emissions
EN55022 (See Note 2)
EN55022 (See Note 2)
EN55022
Level A
Level B
Level A
Set point accuracy
Line regulation
Load regulation
Voltage adjustability
Radiated emissions
Immunity:
ESD air
ESD contact
EFT DC Input
Radiated field enclosure EN61000-4-3
Conducted (DC power) EN61000-4-6
Low line to high line
Full load to min. load
EN61000-4-2
EN61000-4-2
EN61000-4-4
8kV, 15kV
6kV, 8kV
2kV (NP)
10V/m
10V (NP)
10V (NP)
Output remote
sense range
(See Note 9)
Conducted (signal)
Input transients
EN61000-4-6
ETS 300 132-2, ETR 283
Minimum load
Overshoot
0A
None
None
GENERAL SPECIFICATIONS
At turn-on and turn-off
5Hz to 20MHz
Efficiency
See table
1500VDC
350kHz
Undershoot
Operational insulation
Switching frequency
Input/output
Fixed
Ripple and noise
120mV pk-pk
30mV rms
Transient response
(See Note 1)
5% max. deviation
200µs recovery to
within total error band
Approvals and
standards (See Note 4)
EN60950 (TÜV Product Service)
UL/cUL60950
Material flammability
Weight
UL94V-0
INPUT SPECIFICATIONS
Input voltage range
Input current
25g (0.88oz)
48Vin nominal
33 to 75VDC
MTBF
MIL-HDBK-217F
@ 40°C, 100% load
ground benign
>292,000 hours
No load
Remote OFF
60mA
25mA
Input current (max.)
(See Note 3)
1.73A max. @ Io max.
and Vin = 33
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating temperature -40°C to +90°C
Input reflected ripple
(See Note 5)
110mA (pk-pk)
Non-operating -40°C to +125°C
Active high remote ON/OFF
(See Note 7)
Open collector ref to -input
Open circuit or <12VDC
<1.2VDC
Logic compatibility
ON
OFF
Undervoltage lockout
Power up
Power down
32.5V
30.5V
Start-up time
(See Note 6)
Power up
Remote ON/OFF
10ms
3ms
File Name: EXQ50S.PDF Rev: 01 Nov 2002