Stereo PDM-to-I2S or
TDM Conversion IC
ADAU7002
Data Sheet
FEATURES
GENERAL DESCRIPTION
64× decimation of a stereo pulse density modulation (PDM)
bit stream to pulse code modulation (PCM) audio data
Slave I2S or time division multiplexed (TDM) output interface
Configurable TDM slots
I/O supply operation: 1.62 V to 3.6 V
64× output sample rate PDM clock
The ADAU7002 converts a stereo PDM bit stream into a PCM
output. The source for the PDM data can be two microphones
or other PDM sources. The PCM audio data is output on a
serial audio interface port in either I2S or TDM format.
The ADAU7002 is specified over the commercial temperature
range (−40°C to +85°C). It is available in a halide-free, 8-ball,
1.56 mm × 0.76 mm, wafer level chip scale package (WLCSP).
64×/128×/192×/256×/384×/512× output sample rate BCLK
Automatic BCLK ratio detection
Output sample rate: 4 kHz to 96 kHz
Automatic PDM CLK drive at 64× the sample rate
Automatic power down with BCLK removal
0.67 mA operating current at 48 kHz and 1.8 V IOVDD supply
Shutdown current: <1 µA
8-ball, 1.56 mm × 0.76 mm, 0.4 mm pitch WLCSP
Power-on reset
APPLICATIONS
Mobile computing
Portable electronics
Consumer electronics
FUNCTIONAL BLOCK DIAGRAM
1.62V TO 3.6V
CONFIG
GND
IOVDD
PDM_CLK
PDM_DAT
BCLK
2
PDM
INPUT
PORT
DIGITAL
DECIMATION
FILTERING
I S
OUTPUT
PORT
LRCLK
SDATA
ADAU7002
Figure 1.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com