Audio Switching Amplifier
AD1992
FEATURES
GENERAL DESCRIPTION
Integrated stereo modulator and power stage
<0.002% THD + N
102 dB dynamic range (A-weighted)
2 × 10 W output power (4 Ω, <0.01% THD + N)
RDS-ON < 0.3 Ω (per transistor)
PSRR > 65 dB
On-off-mute pop noise suppression
EMI optimized modulator
Short-circuit protection
The AD1992 is a 2-channel, bridge tied load (BTL), switching
audio power amplifier with integrated Σ-Δ modulator. The
modulator accepts a single-ended, analog input signal and
converts it to a switching waveform to drive speakers directly. A
digital, microprocessor-compatible interface provides control of
reset, mute, and PGA gain, as well as feedback signals for thermal
and overcurrent error conditions. The output stage can operate
over a power supply voltages range of 8 V to 20 V. The analog
modulator and digital logic operate from a 5 V supply.
Overtemperature protection
Low cost DMOS process
APPLICATIONS
Advanced televisions
Compact multimedia systems
Minicomponents
FUNCTIONAL BLOCK DIAGRAM
FEEDBACK
NETWORK
PGA1
PGA0
AV
DV
DD
PV
DD
DD
AD1992
A1
A2
OUTL+
AINL
Σ-Δ
MODULATOR
PGA
B1
B2
LEVEL
SHIFTER
AND
DEAD TIME
CONTROL
OUTL–
OUTR+
H-BRIDGE
AINR
Σ-Δ
MODULATOR
PGA
C1
C2
CLKI
MODE CONTROL
LOGIC AND
OSCILLATOR
POP/CLICK
CLKO
SUPPRESSION
D1
D2
REF_FILT
OUTR–
VOLTAGE
REFERENCE
AGND
PGND
FEEDBACK
NETWORK
Figure 1.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2006 Analog Devices, Inc. All rights reserved.