Fully Accurate 16-Bit VOUT nanoDAC
SPI Interface 2.7 V to 5.5 V in an MSOP
AD5063
FUNCTIONAL BLOCK DIAGRAM
FEATURES
V
V
DD
Single 16-bit DAC, 1 LSB INL
REF
Power-on reset to midscale
Guaranteed monotonic by design
3 power-down functions
AD5063
POWER-ON
RESET
BUF
R
FB
INV
Low power serial interface with Schmitt-triggered inputs
10-lead MSOP, low power
REF(+)
DAC
DAC
REGISTER
V
OUT
Fast settling time of 1 μs maximum (AD5063-1 model)
2.7 V to 5.5 V power supply
Low glitch on power-up
Unbuffered voltage capable of driving 60 kΩ load
SYNC interrupt facility
AGND
INPUT
CONTROL
LOGIC
POWER-DOWN
CONTROL LOGIC
RESISTOR
NETWORK
APPLICATIONS
SYNC SCLK DIN
DACGND
Process control
Figure 1.
Data acquisition systems
Table 1. Related Devices
Portable battery-powered instruments
Digital gain and offset adjustment
Programmable voltage and current sources
Programmable attenuators
Part No.
Description
AD5061
2.7 V to 5.5 V, 16-bit nanoDAC D/A,
4 LSBs INL, SOT-23.
AD5062
2.7 V to 5.5 V, 16-bit nanoDAC D/A,
1 LSB INL, SOT-23.
AD5040/AD5060 2.7 V to 5.5 V, 14-/16-bit nanoDAC D/A,
1 LSB INL, SOT-23.
GENERAL DESCRIPTION
that reduces the current consumption of the device to typically
300 nA at 5 V and provides software-selectable output loads
while in power-down mode. The part is put into power-down
mode via the serial interface. Total unadjusted error for the part
is <1 mV.
The AD5063, a member of ADI’s nanoDAC™ family, is a low
power, single 16-bit, unbuffered voltage-output DAC that operates
from a single 2.7 V to 5 V supply. The part offers a relative
accuracy specification of 1 ꢀLB, and operation is guaranteed
monotonic with a 1 ꢀLB DNꢀ specification. The AD5063
comes with on-board resistors in a 10-lead MLOP, allowing
bipolar signals to be generated with an output amplifier. The
part uses a versatile 3-wire serial interface that operates at
clock rates up to 30 MHz and that is compatible with standard
LPI®, QLPI™, MICROWIRE™, and DLP interface standards. The
reference for the AD5063 is supplied from an external VREF pin.
A reference buffer is also provided on-chip. The part incor-
porates a power-on reset circuit that ensures the DAC output
powers up to midscale and remains there until a valid write to
the device takes place. The part contains a power-down feature
This part exhibits very low glitch on power-up.
PRODUCT HIGHLIGHTS
Available in 10-lead MLOP.
16-bit accurate, 1 ꢀLB INꢀ.
ꢀow glitch on power-up.
High speed serial interface with clock speeds up to 30 MHz.
Three power-down modes available to the user.
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2005–2009 Analog Devices, Inc. All rights reserved.