ES2000
Flame-retardant, adhesive-lined heat-shrinkable
tubing (extended temperature range)
Adhesive-lined ES2000 heat-
shrinkable tubing is specifically
designed to meet automotive industry
requirements for environmental
sealing and electrical insulation of
automotive wire splices, terminations,
and components.
protection of wire splices and
mechanically sensitive components.
The inner layer of the tubing is a
unique hot-melt adhesive, specially
formulated to adhere to all major
types of automotive wire insulation
and to perform well at an extended
temperature range. The adhesive
forms an effective barrier against
automotive fluids and moisture,
helping to protect the harness
from the effects of corrosion and
water wicking.
Because ES2000 tubing has a high
shrink ratio, only a few sizes are
needed to cover a wide range of
splice and component diameters.
ES2000 tubing dimensions have been
engineered to provide low-cost
sealing solutions on multiple-wire
splices (up to seven wires per side),
using standard Tyco Electronics
application equipment.
ES2000 tubing has an outer jacket
of radiation-crosslinked, semirigid
polyolefin. Flame-retardant and
mechanically tough, the jacket
provides strain relief and abrasion
Temperature rating
Full recovery temperature:
135°C
–40°C to 130°C
Continuous operating temperature:
Specifications*
Type
Raychem
UL
ES2000
RT-1112
E85381
*When ordering, always specify latest issue.
Dimensions (millimeters/inches)
Expanded as supplied
W1 W2
Fully recovered
after heating
d
D
W
Inside diameter (including core)
Recovered wall thickness**
D (min.)
d (max.)
W
W1
W2
Expanded
Recovered after
heating
Minimum
total wall
1.20 0.047
1.52 0.060
1.91 0.075
2.41 0.095
Minimum
Minimum
Part number
ES2000-No.1
ES2000-No.2
ES2000-No.3
ES2000-No.4
as supplied
5.72 0.225
7.44 0.293
10.85 0.427
17.78 0.700
jacket wall
0.64 0.025
0.76 0.030
0.89 0.035
1.04 0.041
adhesive wall
0.56 0.022
0.76 0.030
1.02 0.040
1.37 0.054
1.27 0.050
1.65 0.065
2.41 0.095
4.45 0.175
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Ordering information
Color
Black
Size selection
Standard packaging
Marking
Consult manufacturer’s recommended size selection guidelines.
Cut pieces. See reverse for information on standard cut lengths.
Tubing will be marked with the number size (for example, ES-1, ES-2, ES-3, or ES-4).
Ordering description
Specify product name, size, color, and cut length; for example, ES2000-No.2-0-50MM (0=Black).