F-210
®
(0,50mm) .0197"
(0,80mm) .0315"
EQCD–040–04.00–TTL–STR–2
HQCD–030–06.00–TED–TED–1–F
HQCD, EQCD SERIES
®
Q STRIP COAX CABLE ASSEMBLIES
38 AWG micro ribbon
coax cable
HQCD Mates with:
Surface Mount,
Edge Mount or
Panel Mount
SPECIFICATIONS
QTH, QSH
For complete specifications see
www.samtec.com?HQCD or
www.samtec.com?EQCD
EQCD Mates with:
QTE, QSE
Cable:
38 AWG micro ribbon
coax cable
FILE NO. E111594
Signal Routing:
Socket or
Terminal
50Ω Single-Ended
Overall Length:
(95,3mm) 03.75" to
(1m) 40" standard
Cable Flexing Life:
>10,000 cycles
SCREW MOUNT
APPLICATIONS
(–F, –S, –B)
0,50mm or
0,80mm pitch
Cable Bending Radius:
<2,5mm
Plating:
Au over 50µ" (1,27µm) Ni
Current Rating:
Rated @ -3dB Insertion Loss
Cable
300 milliamp max
Cable Propagation Delay:
4.4 nsec/meter
Length
EQCD
HQCD
39.37" (1m)
465 MHz / .930 Gbps 370 MHz / .740 Gbps
Operating Temp Range:
-40°C to +105°C
Unmating Force (-RT1 option):
-RT1 option increases
unmating force up to 50%
RoHS Compliant:
Yes
Screw Mount
options
Performance and complete test data available at
www.samtec.com?EQCD, www.samtec.com?HQCD
or contact sig@samtec.com
SO–0318–04–01–02
SO–0165–04–01–02
NO. OF POSITIONS
PER ROW
TYPE
WIRE LENGTH
APPLICATIONS
–“XX.XX”
(12,70)
.500
–030, –060, –090, –120
= Wire Length in Inches
(95,3mm) 03.75" Minimum
(HQCD Series)
HQCD
= (0,50mm) .0197" pitch
–020, –040, –060, –080
(EQCD Series)
(16,56)
.652
EQCD
= (0,80mm) .0315" pitch
(9,28)
.365
OAL = Wire Length + L
Wire Length (1,27) .050
Processing conditions will
affect mated height.
APPLICATION
SPECIFIC
L
END TO END
• Other sizes and lengths
• Other terminations
• Other wire AWG
Surface Mount to
Surface Mount
Surface Mount to
Edge Mount (Terminal)
Surface Mount to
Edge Mount (Socket)
Edge Mount (Terminal) to
Edge Mount (Terminal)
Edge Mount (Terminal) to
Edge Mount (Socket)
(24,13)
.950
(21,21)
.835
(20,47)
.806
Contact dr@samtec.com
#4-40
Thread
(18,29)
.720
Note:
Cable lengths longer than
40.00" (1 meter) are not
supported with S.I. test data.
(17,55)
.691
(16,81)
.662
Edge Mount (Socket) to
Edge Mount (Socket)
END NO. 1
(–STL SHOWN)
Note:
END NO. 2
(–SEU SHOWN)
Verify part number with
Samtec’s Interactive Cable
Builder at www.samtec.com/
cable_builder/pitch.asp
Note:
This Series is non-standard,
non-returnable.
WWW.SAMTEC.COM