R
EM MICROELECTRONIC - MARIN SA
EM6620
Ultra Low Power Microcontroller with 4x8 LCD Driver
Features
Figure 1. Architecture
• Low Power
- 2.1 µA active mode, LCD On
- 0.5 µA standby mode, LCD Off
- 0.1 µA sleep mode
@ 1.5V, 32kHz, 25°C
• Low Voltage
- 1.2 to 3.6 V
• SVLD - metal mask programmable (2.0V)
• ROM
• RAM
- 1280 × 16 bits
64 × 4 bits
-
• 2 clocks per instruction cycle
• 72 basic instructions
• Oscillation supervisor
• Timer watchdog (2 sec)
• Max. 8 inputs ; port A, port B
• max. 4 outputs ; port B
• LCD 8 segments, 3 or 4 times multiplexed
• Universal 10-bit counter, PWM, event counter
• Prescaler down to 1 Hz (crystal = 32 KHz)
• 1/1000 sec, 12 bit binary coded decimal counter
with hard or software start/stop function
• Frequency output 1Hz, 2048 Hz, 32 KHz, PWM
• 7 internal interrupt sources (BCD counter,
• 2×10-bit counter, 3× prescaler, SVLD)
• 5 external interrupt sources (port A, compare)
Description
Figure 2. Pin Configuration
The EM6620 is an advanced single chip CMOS 4-
bit microcontroller. It contains ROM, RAM, power
on reset, watchdog timer, oscillation detection
circuit, 10 bit up/down counter, Millisecond counter,
prescaler, voltage level detector (SVLD), compare
input, frequency output, LCD driver and several
clock functions. The low voltage feature and low
power consumption make it the most suitable
controller for battery, stand alone and mobile
equipment. The EM6620 is manufactured using EM
Microeletronic’s Advanced Low Power (ALP)
CMOS Process.
Typical Applications
• Timing device
• Medical applications
• Domestic appliance
• Timer / sports timing devices
• Safety and security devices
• Automotive controls with display
• Measurement equipment
• Interactive system with display
• Bicycle computers
1
www.emmicroelectronic.com
Copyright © 2005, EM Microelectronic-Marin SA