APPLICABLE STANDARD
Operating
TÜV approved(R50204909), UL approved(E52653)
Storage Temperature
Range
-10C to
+60C
-40C to
+125C (4)
Temperature Range
AC, DC 500 V(UL,TÜV)
AC, DC 1000V
―
Rating
Voltage
Current
―
―
Applicable Cable
―
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Examined visually and with a measuring instrument.
Confirmed visually.
X
X
X
X
According to the drawing.
Marking
ELECTRICAL CHARACTERISTICS
―
m MAX.
-
-
Contact Resistance
Measured at ―.
Insulation Resistance
Voltage Proof
Measured at 500 V DC.
5000 M MIN.
X
X
X
X
4260 V AC applied for 1 min.
No flashover or breakdown.
MECHANICAL CHARACTERISTICS
Contact Insertion and
Measured with a φ___ steel gauge.
Insertion and extraction forces: - N MIN.
-
-
-
Extraction Forces
Mating and
Mating and unmating forces: 100 N MAX.
Measured with an applicable connector
X
Unmating Forces
Contact Retention Force
Subjected to a 50N force from the wiring side.
Mated and unmated 100 times.
No movement of contact.
X
X
-
-
Mechanical Operation
Vibration
No damage, cracks or looseness of parts.
Frequency: 10 Hz to 55 to 10 Hz every cycle.
Single amplitude: 0.75 mm, Acceleration: 98 m/s2
Performed over 10 cycles in each of three mutually
perpendicular directions.
1) No electrical discontinuity of more than 10 s.
X
-
2) No damage, cracks or looseness of parts.
Shock
Acceleration: 490 m/s2, Half sine wave pulses of 11 ms.
Performed 3 times in each of three mutually perpendicular
directions.
1) No electrical discontinuity of more than 10 s.
X
-
2) No damage, cracks or looseness of parts.
ENVIRONMENTAL CHARACTERISTICS
Rapid Change of Temperature Temperature: -55 → R/T(1) → +125 → R/T C
Time: 30 → 2 to 3 → 30 → 2 to 3 min
1) Insulation resistance: 500 M MIN.
X
X
-
-
2) No damage, cracks or looseness of parts.
for 5 cycles.
Damp Heat, Steady State
Subjected to a temperature of+40C, at a humidity of 90 to
1) Insulation resistance: 50 M MIN.
(At high humidity)
95% for 96 hours.
2) Insulation resistance: 500 M MIN.
(When dry)
3) No damage, cracks or looseness of parts.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
NOTES
APPROVED
CHECKED
DESIGNED
DRAWN
HY.KOBAYASHI
HY.KOBAYASHI
DS.MATSUNE
20181203
20181203
20181203
20181203
(1) R/T:Room Temperature.
(2) The above specifications show the values in assembled condition with applicable
crimp contacts.
(3) RoHS2 compliant.
(4) Including temperature rise due to current carrying.
Unless otherwise specified, refer to JIS C 5402(IEC 60512).
DS.MATSUNE
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-117061-81-00
EM35MP-4PC(81)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
1/1
CL138-0021-1-81
△
FORM HD0011-2-1