5秒后页面跳转
EL6287C PDF预览

EL6287C

更新时间: 2024-01-18 00:58:30
品牌 Logo 应用领域
ELANTEC 振荡器驱动器二极管激光二极管
页数 文件大小 规格书
2页 136K
描述
4-Ch Laser Diode Driver + Oscillator

EL6287C 技术参数

生命周期:TransferredReach Compliance Code:unknown
风险等级:5.68Is Samacsys:N
Base Number Matches:1

EL6287C 数据手册

 浏览型号EL6287C的Datasheet PDF文件第2页 
EL6287C - Product Brief  
4-Ch Laser Diode Driver + Oscillator  
Features  
General Description  
• “Shrink-Small” Outline Package  
The EL6287C is a four channel laser diode current amplifier that pro-  
vides controlled current to a grounded laser diode. Channels 2, 3, and  
4 must be used as the write channels, with switching speeds of approx-  
imately one nanosecond rise/fall time. All four channels are summed  
together at the IOUT output, allowing the user to create multilevel  
waveforms in order to optimize laser diode performance. The level of  
the output current is set by an analog voltage applied to an external  
resistor which converts the voltage into a current at the IIN pin (virtu-  
ally ground). The current seen at this pin is then amplified to become a  
• Voltage-controlled output current  
source requiring one external set  
resistor per channel  
• Current-controlled output current  
source  
• Rise time = 0.8 nsec  
• Fall time = 0.8 nsec  
• On chip oscillator with frequency  
and amplitude control by use of  
external resistors to ground  
• Oscillator to 500MHz  
• Oscillator to 100mA pk/pk  
• Single +5V supply (±10%)  
• Disable feature for power-up  
protection and power savings  
• CMOS control signals  
current source at pin IOUT  
.
An on-chip 500MHz oscillator is provided to allow current modula-  
tion when in read mode. This is turned on when the OSCEN pin is held  
high. Complete control of amplitude and frequency is set by two exter-  
nal resistors connected to ground at pins RFREQ and RAMP (see  
graphs in this data sheet for further explanation). The oscillator will  
turn off whenever any of the OUTEN pins for channels 2, 3, or 4 (the  
write channels) are low (see truth table).  
The external resistors allow the user to accurately and independently  
set each amplifier transconductance by applying a voltage to each  
resistor, without restriction on the voltage range, thus ensuring broad  
voltage DAC compatibility. Alternatively, the IIN pin can be biased  
from a current DAC or other current source.  
Applications  
• CD-RW applications  
• Writable optical drives  
• Laser diode current switching  
Connection Diagram  
Ordering Information  
1
2
3
4
5
6
7
8
9
GND  
IINR  
GND  
IIN2  
GND 24  
VCC 23  
Part No  
Temp. Range  
Package  
Outline #  
EL6287CU  
0°C to +70°C  
24-Pin QSOP  
MDP0040  
VCC 22  
IOUT 21  
IOUT 20  
GND 19  
RAMP 18  
RFREQ  
IIN3  
IIN4  
OUTENR ENABLE 17  
OUTEN2 OSCEN 16  
10 OUTEN3  
11 OUTEN4  
12 GND  
VCC 15  
VCC 14  
GND 13  
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these  
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.  
© 2001 Elantec Semiconductor, Inc.  

与EL6287C相关器件

型号 品牌 描述 获取价格 数据表
EL6287CU ELANTEC 4-Ch Laser Diode Driver + Oscillator

获取价格

EL6288C ELANTEC 3-Channel Laser Diode Driver w/Oscillator & APC Amplifier

获取价格

EL6288CU ELANTEC 3-Channel Laser Diode Driver w/Oscillator & APC Amplifier

获取价格

EL6290C ELANTEC Laser Diode Driver with Waveform Generator

获取价格

EL6290CJ ELANTEC Laser Diode Driver with Waveform Generator

获取价格

EL6290CL ELANTEC Laser Diode Driver with Waveform Generator

获取价格