EL5481C/EL5482C
Quad 8ns High-Speed Comparators
Features
General Description
• 8ns Typ. Propagation Delay
• 5V to 12V Input Supply
• +2.7V to +5V Output Supply
• True-to-ground Input
The EL5481C and EL5482C comparators are designed for operation
in single supply and dual supply applications with 5V to 12V between
V + and V -. For single supplies, the inputs can operate from 0.1V
S
S
below ground for use in ground sensing applications.
• Rail-to-rail Outputs
• Active Low Latch
• Single (EL5181C) Available
• Dual (EL5281C) Available
• Window Available (EL5283C)
The output side of the comparators can be supplied from a single sup-
ply of 2.7V to 5V. The rail-to-rail output swing enables direct
connection of the comparator to both CMOS and TTL logic circuits.
The latch input of the EL5482C can be used to hold the comparator
output value by applying a low logic level to the pin.
• Pin-compatible 4ns Family
Available (EL5185C, EL5285C,
EL5287C, EL5485C & EL5486C)
The EL5481C is available in the 16-pin SO (0.150") package and the
EL5482C in the 24-pin QSOP package. All are specified for operation
over the full -40°C to +85°C temperature range. Also available are a
single (EL5181C), a dual (EL5281C), and a window comparator
(EL5283C).
Applications
• Threshold Detection
• High Speed Sampling Circuits
• High Speed Triggers
• Line Receivers
Pin Configurations
• PWM Circuits
• High Speed V/F Converters
INA-
INA+
1
2
3
4
5
6
7
8
9
24 IND-
23 IND+
22 NC
NC
Ordering Information
+
-
-
+
Tape &
GND
21 VS+
Part No.
EL5481CS
Package
Reel
-
Outline #
MDP0027
MDP0027
MDP0027
MDP0040
MDP0040
16-Pin SO (0.150")
16-Pin SO (0.150")
16-Pin SO (0.150")
24-Pin QSOP
LATCHA
OUTA
OUTB
LATCHB
VS-
20 LATCHD
19 OUTD
18 OUTC
17 LATCHC
16 VSD
15 NC
INA-
INA+
GND
OUTA
OUTB
VS-
1
2
3
4
5
6
7
8
16 IND-
EL5481CS-T7
EL5481CS-T13
EL5482CU
7”
13”
-
IND+
VS+
15
14
13
12
11
10
9
EL5482CU-T13
24-Pin QSOP
13”
+
-
-
+
OUTD
OUTC
VSD
-
+
+
-
NC 10
INB+ 11
INB- 12
+
-
-
+
INB+
INB-
INC+
INC-
14 INC+
13 INC-
EL5482CU
24-Pin QSOP
EL5481CS
16-Pin SO (0.150")
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.