EL5001
®
Data Sheet
January 31, 2005
FN7376.2
6-Channel Clock Driver
Features
• SIx inverting/non-inverting channels
The EL5001 is a 6-channel level shifting driver designed
primarily for use as a clock driver in LTPS LCD displays. The
EL5001 buffers and level shifts six logic level input signals.
The six channels are grouped in to two sets, one of two
channels and one of four channels. Each set can be
configured in the inverting or non-inverting modes.
Operating from 3.3V input logic, the output swing is set using
two reference input pins. These pins can be up to 18V
differential and are not buffered, so should therefore be
bypassed effectively.
• 3.3V input logic
• 18V output
• 250µA typical supply current
• Drives up to 500pF
• T /T = 35ns max
R
F
• Disable function
• 20-pin QFN (4mm x 4mm) and HTSSOP packages
• Pb-free available (RoHS compliant)
The EL5001 is designed to drive capacitive loads of 500pF
with rise and fall times of just 20ns. A three-state pin is
provided to set all outputs in to a high impedance mode. The
ENABLE pin can be used to put the device in to a power
save mode where the power consumption drops to just 3µA.
Applications
• LTPS LCD clock drivers
• CCD driving
The EL5001 is available in 20-pin QFN (4mm x 4mm) and
HTSSOP packages. Both are specified for operation over
the -40°C to +85°C temperature range.
• Level shifters
Ordering Information
TAPE &
TAPE &
PART NUMBER
PACKAGE
REEL
PKG. DWG. #
PART NUMBER
PACKAGE
REEL
PKG. DWG. #
EL5001IL
20-Pin QFN
(4mm x 4mm)
-
MDP0046
EL5001IRE
20-Pin
HTSSOP
-
MDP0048
EL5001IL-T7
EL5001IL-T13
20-Pin QFN
7”
13”
-
MDP0046
MDP0046
MDP0046
EL5001IRE-T7
EL5001IRE-T13
20-Pin
7”
13”
-
MDP0048
MDP0048
MDP0048
(4mm x 4mm)
HTSSOP
20-Pin QFN
(4mm x 4mm)
20-Pin
HTSSOP
EL5001ILZ
(See Note)
20-Pin QFN
(4mm x 4mm)
(Pb-Free)
EL5001IREZ
(See Note)
20-Pin
HTSSOP
(Pb-Free)
EL5001ILZ-T7
(See Note)
20-Pin QFN
(4mm x 4mm)
(Pb-Free)
7”
MDP0046
MDP0046
EL5001IREZ-T7
(See Note)
20-Pin
7”
MDP0048
MDP0048
HTSSOP
(Pb-Free)
EL5001ILZ-T13
(See Note)
20-Pin QFN
(4mm x 4mm)
(Pb-Free)
13”
EL5001IREZ-T13
(See Note)
20-Pin
HTSSOP
(Pb-Free)
13”
NOTE: Intersil Pb-free products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination
finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-
free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020C.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2004, 2005. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.