EL32D1 Series
EL32D1
• Voltage Controlled Crystal Oscillators (VCXO)
• LVDS Output
• +3.3V Supply Voltage
• Complementary Output
H 2.0
L 7.0
W 5.0
• Tri-State Output Function (Pad 2)
• External Voltage Control Function
• 6 Pad Ceramic SMD Package
• RoHS Compliant (Pb-Free)
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)
50, 51.84, 52, 52.08, 54, 57.1429, 61.44, 63.36, 65.536, 76.8, 77.76, 100, 104, 106.25, 122.88, 125, 126.72,
128, 153.6, 155.52, 156.25, 159.375, 161.1328, 166.6286, 167.3315, 184.32, 186.666, 200MHz
Operating Temperature Range
0°C to +70°C
-40°C to +85°C
Storage Temperature Range
Supply Voltage (VCC)
-55°C to +125°C
3.3VDC 5ꢀ
Differential Output Voltage (VOD
Input Current
Frequency Tolerance / Stability
)
247mV Minimum, 355mV Typical, 454mV Maximum
80mA Maximum
50ppm or 25ppm Maximum
Inclusive of all conditions: Calibration Tolerance at 25°C,
Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, 1st Year Aging,
Shock, and Vibration
Output Voltage Logic High (VOH
Output Voltage Logic Low (VOL
DD Magnitude Change (DVOD
Offset Voltage (VOS
Rise Time / Fall Time
Duty Cycle
)
)
1.43VDC Typical, 1.6VDC Maximum
1.1VDC Typical, 0.9VDC Minimum
-50mV Minimum, +50mV Maximum
1.125V Minimum, 1.20V Typical, 1.375V Maximum
1 nSeconds Maximum
50 10(ꢀ)
V
)
)
20ꢀ to 80ꢀ of waveform
at 50ꢀ of waveform
50 5(ꢀ)
25mV Maximum
Offset Voltage Magnitude Change (DVOS
Load Drive Capability
Control Voltage (VC)
)
Between Output and Complementary Output
Test Conditions for Frequency Deviation
100 Ohms and 10pF
1.65VDC 1.65VDC
Control Voltage Range (VCR)
Frequency Deviation
0.0VDC to VCC +0.5VDC
75ppm Minimum
Inclusive of Operating Temperature Range, Supply
Voltage Change, and Output Load Change
Linearity
Transfer Function
Modulation Bandwidth (MBW)
Input Impedance (ZI)
Typical Phase Noise (Fo = 155.520MHz)
20ꢀ, 15ꢀ, or 10ꢀ Maximum
Positive Transfer Characteristic
10kHz Minimum
Measured at -3dB with Contol Voltage of +1.65VDC
50kOhms Typical
-55dBc/Hz
at 10Hz Offset
at 100Hz Offset
at 1kHz Offset
at 10kHz Offset
at 100kHz Offset
at 1MHz Offset
-90dBc/Hz
-120dBc/Hz
-140dBc/Hz
-145dBc/Hz
-148dBc/Hz
Logic Control/Additional Output
Tri-State Input Voltage
Tri-State Enable High / Complementary Output
Enables Output
Enables Output
V
IH of 70ꢀ of VCC Minimum
No Connection
IL of 30ꢀ of VCC Maximum
V
Disables Outputs: High Impedance
0.4pSec Typical, 1 pSec Maximum
4pSec Typical, 5pSec Maximum
3pSec Typical, 5pSec Maximum
3pSec Typical, 5pSec Maximum
4pSec Typical, 10pSec Maximum
27pSec Typical, 40pSec Maximum
10mSec Maximum
RMS Phase Jitter
FJ = 12kHz to 20MHz
Sigma of Total Jitter Distribution
Sigma of Random Jitter
Accumulated Period Jitter (tacc
)
Period Jitter (trj)
Period Jitter (trms
)
Sigma of Total Jitter Distribution
Deterministic Jitter
Peak to Peak of Jitter Distribution
Period Jitter (tdj)
Period Jitter (tp-p
)
Start Up Time
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EL32D1
CERAMIC
3.3V
OS3Z
01/11
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.