No.646G / Oct.2004
Engineering Bulletin
Aluminum Electrolytic Capacitors
@Slender case sizes are lined up for laying down small places on PC board
@For electronic ballast circuits and other long life required applications
@Endurance with ripple current : 105C 8000 to 10000 hours
@Non solvent-proof type
@Pb-free design
SPECIFICATIONS
?
Items
Characteristics
Category
Temperature Range
40 to +105C (160 to 400Vdc)
25 to+105C (450Vdc)
Rated Voltage Range 160 to 450Vdc
Capacitance Tolerance P20% (M)
(at 20C, 120Hz)
time
Leakage Current
After 1 minute
After 5 minutes
CV
CV[1000
CV 1000
I=0.1CV+40
I=0.03CV+15
I=0.02CV+25
>
I=0.04CV+100
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C)
Dissipation Factor
Rated voltage (Vdc)
tanE (Max.)
160 to 250V 350 & 400V 450V
0.20 0.24 0.24
160 to 250V 350 & 400V 450V
(tanE)
(at 20C, 120Hz)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Rated voltage (Vdc)
Z(
-
-
25C)/Z(+20C)
40C)/Z(+20C)
3
6
5
6
6
Z(
(at 120Hz)
Endurance
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 10000 hours (8000 hours for F10) at 105C.
Capacitance change
D.F. (tanE)
[P20% of the initial value
[200% of the initial specified value
[The initial specified value
Leakage current
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 105C
without voltage applied.
Capacitance change
D.F. (tanE)
[P20% of the initial value
[200% of the initial specified value
[500% of the initial specified value
Leakage current
DIMENSIONS [mm]
?
@Terminal Code : E
Sleeve (PET)
fD 10 12.5 16
18
fd 0.6 0.6 0.8 0.8
F
fD'
L'
5.0 5.0 7.5 7.5
FD+0.5max.
L'
15min.
4min.
Vent
L+1.5max.
(F10)
(F12.5 to F18)
Gas escaped end seal
PART NUMBERING SYSTEM
?
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
E KM X A A A E A A A A A M A A A S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 3.3MF:3R3,10MF:100,100MF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 160V:161,250V:251,450V:451)
Series code
Category
Specifications in this bulletin are subject to change without notice.
NIPPON CHEMI-CON CORPORATION
1219
1