LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Downsized snap-ins, 105℃
K
MQS
er
ies
KMR
Downsized
●
Endurance with ripple current : 2,000 hours at 105℃
Non solvent resistant type
RoHS Compliant
●
●
KMQ
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-40 to +105℃ (35&50Vdc), -25 to +105℃ (160 to 450Vdc)
Rated Voltage Range 35&50Vdc, 160 to 450Vdc
Capacitance Tolerance
Leakage Current
±
20% (M)
I≦3 CV
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃, 120Hz)
(at 20℃ after 5 minutes)
Dissipation Factor
Rated voltage (Vdc)
Nominal capacitance (
tanδ(Max.)
35V
50V
10,000 10,000>C
0.35 0.25
160 to 250V 315 to 450V
160 to 250V 315 to 400V 420 & 450V
(tanδ)
µ
F) 10,000>C
C
≧
C
≧
0.30
10,000
0.30
35&50V
4
0.15
0.15
0.20
(at 20℃, 120Hz)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Rated voltage (Vdc)
Z(-25℃)/Z(+20℃)
4
8
Z(-40℃)/Z(+20℃)
10
(at 120Hz)
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105℃.
Capacitance change
D.F. (tanδ)
Leakage current
≦
±
20% of the initial value
200% of the initial specified value
The initial specified value
≦
≦
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20℃after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
D.F. (tanδ)
Leakage current
≦
±
15% of the initial value
150% of the initial specified value
The initial specified value
≦
≦
◆DIMENSIONS [mm]
●
●
Terminal Code : VS (φ22 toφ35) : Standard
Terminal Code : LI (φ35)
Sleeve (PET : Brown)
PC board pin-out
Sleeve (PET : Brown)
PC board pin-out
-1.2×6
Negative mark
Negative mark
2
5±0.5
2-
φ2
14.2±1
4.0±0.5
L±2
L
±
2
4.5±1
Vent
Vent
The standard design has no plastic disc.
◆PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15 16 17
18
E KMQ A A A V S N A A A M A A A S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 68µF:680, 3,300µF:332)
Dummy terminal code
Terminal code (VS, LI)
Voltage code (ex. 160V:161, 315V:3B1, 450V:451)
Series code
Category
Please refer to "Product code guide (snap-in type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
(1/4)
CAT. No. E1001M