Power entry modules without line filter
EF11
https://www.schurter.com /PG05
IEC Appliance Inlet C20 with Circuit Breaker TA45
Screw-on version from front or rear side
Rocker non-illuminated
white
Snap-in mounting from front side
Rocker illuminated
orange
C20
See below:
Approvals and Compliances
70° C
Description
Characteristics
- Panel mount :
- All single elements are already wired
- Unwired versions available on request
- Circuit Breaker non-illuminated or illuminated
- Suitable for use in equipment according to IEC/UL 62368-1
Screw-on version from front or rear side, snap-in version front side
- 2 Functions :
Appliance Inlet Protection class I , circuit breaker type TA45 2-pole
- Quick connect terminals 6.3 x 0.8 mm
Other versions on request
- Unwired versions
- Variant with notch for V-Lock mating Cordsets
References
Alternative: version with line filter EF12
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
16A / 250VAC; 50Hz
20A / 250VAC; 60Hz
> 1.5kVAC between L-N
> 3kVAC between L/N-PE
(1min/50Hz)
Appliance inlet/-outlet
Circuit Breakers
C20 acc. to IEC 60320-1,
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 16A, Protection Class I
Acc. IEC/EN 60934, UL 1077, CSA
22.2 no. 235
2-pole rocker switch, illuminated or non-
illuminated. Optional with undervoltage-
or remote trip release
Allowable Operation Tempe-
rature
IP-Protection
Protection against electric
shock
Terminal
-10°C to 55°C
front side IP40 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
Quick connect terminals 6.3 x 0.8 mm
Screw: max 8mm
Short circuit capacity Icn:
at In < 3A/240VAC : 10 x In
at In ≥ 3A/240VAC : 300A
Panel Thickness S
Mounting screw torque max 0.5Nm
Snap-in: 1.5/2/2.5 mm
Material: Housing
Thermoplastic, black, UL 94V-0
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-
ments by SCHURTER.
1
Connectors