Aluminum Electrolytic Capacitors/ FM
Radial Lead Type
Series:
Type:
FM
A
■ Features
Low impedance (40 % to 70 % less than FC Series)
Endurance : 2000 h to 7000 h at +10ꢀ °C
RoHS directive compliant
■
■
■
■ Attention
Not applicable for automotive
■ Specifications
Category Temp. Range
–40 °C to +10ꢀ °C
Rated W.V. Range
6.3 V.DC to ꢀ0 V.DC
22 μF to 6800 μF
20 % (120 Hz/+20 °C)
0.01 CV (μA) After 2 minutes
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
I
<
W.V.
tan d
6.3
10
16
2ꢀ
3ꢀ
ꢀ0
(max.) (120 Hz/+20 °C)
tan d
0.22 0.19 0.16 0.14 0.12 0.10
Add 0.02 per 1000 μF for products of 1000 μF or more.
After following life test with DC voltage and +10ꢀ °C 2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specified below.
Duration
0ꢀ to 06.3 : 2000 hours, 08×11.ꢀ to 08×1ꢀ: 3000 hours
Endurance
Shelf Life
08×20 to 010×16 : 4000 hours, 010×20 to 012.ꢀ×20/ 016×20: ꢀ000 hours
012.ꢀ×2ꢀ to 012.ꢀ×3ꢀ/ 016×2ꢀ : 7000 hours
Capacitance change 2ꢀ % of initial measured value (6.3 V to 10 V : 30 %)
tan d
DC leakage current
200 % of initial specified value
initial specified value
<
<
After storage for 1000 hours at +10ꢀ °C 2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
■ Frequency correction factor for ripple current
Frequency (Hz)
W.V.(V.DC)
Cap (μF)
60
120
0.ꢀꢀ
0.70
0.7ꢀ
0.80
1 k
10 k
0.90
0.9ꢀ
0.98
1.00
100 k
1.00
1.00
1.00
1.00
22
47
to
to
to
33
330
0.4ꢀ
0.60
0.6ꢀ
0.7ꢀ
0.7ꢀ
0.8ꢀ
0.90
0.9ꢀ
6.3 to ꢀ0
390
1200
1000
to 6800
(Unit : mm)
■ Dimensions in mm (not to scale)
Sleeve
ꢀꢂ08
010ꢀ
Pressure relief
06.3ꢀ
+
–
L=
14 min.
3 min.
0D 0.ꢀ
0D 0.ꢀ
=
Lꢀ16 : L 1.ꢀ
Lꢁ20 : L 2.0
Body Dia. 0D
Body Length L
Lead Dia. 0d
Lead space F
ꢀ
6.3
8
10
—
12.ꢀ
16
—
—
—
—
12.ꢀ to 2ꢀ 30 to 40
0.ꢀ
2.0
0.ꢀ
2.ꢀ
0.6
3.ꢀ
0.6
ꢀ.0
0.6
0.8
0.8
7.ꢀ
ꢀ.0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2014
– EEE-78 –