SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors)
Surface Mount Type
Series:
FD, CD, CX, UD, UE
■ Features
● Low ESR
● Excellent Noise-absorbent Characteristics
● RoHS directive compliant
■ Specifications
Series & Size Code
FD
CD
CX
UD
UE
Category Temp. Range
Rated W.V.Range
Nominal Cap.Range
Capacitance Tolerance
–40 °C to +105 °C
2 V.DC to 6.3 V.DC
100 μF to 560 μF
20 %
2 V.DC to 12.5 V.DC 2 V.DC to 16 V.DC
15 μF to 68 μF 2.2 μF to 220 μF
2 V.DC to 8 V.DC
68 μF to 470 μF
2 V.DC to 8 V.DC
100 μF to 560 μF
Reflow 240 °C : I 0.06 CV (μA) 2minutes (2 V.DC to 4 V.DC)
<
I
0.04 CV or 3 (μA) 2 minutes (6.3 V.DC to 16 V.DC) (Whichever is greater)
<
DC Leakage Current
Reflow 260 °C : I 0.1 CV (μA) 2 minutes
<
tan d
0.06 (120 Hz/+20 °C)
0.10 (120 Hz/+20 °C)
<
<
Surge Voltage
Rated Working Voltage × 1.25 (15 °C to 35 °C)
After applying rated working voltage for 1000 hours at 105 °C 2 °C, and then being stabilized at +20 °C,
capacitor shall meet the following limits.
Endurance
Capacitance change 10% of initial measured value
tan d
DC leakage current
Initial specified value
Initial specified value
<
<
After storing for 500 hours at 60 °C, 90 %
Capacitance change
of initial measurd
value
2, 2.5 V.DC
+70, –20 %
4 V.DC
6.3 V.DC
8 V.DC to 16 V.DC
+40, –20 %
Moisture resistance
+60, –20 %
+50, –20 %
tan d
DC leakage current
200 % of initial specified value
Initial specified value
<
<
■ Marking
■ Dimensions in mm(not to scale)
(Unit : mm)
–
+
P
P
L
W1
Cap.
Polarity bar (Positive)
Series &
Size Code
L 0.2 W1 0.2 W2 0.1
H
P 0.3
Lot No. W.V. code
FD
CD
CX
UD
UE
7.3
7.3
7.3
7.3
7.3
4.3
4.3
4.3
4.3
4.3
2.4
2.4
2.4
2.4
2.4
1.1 0.1
1.8 0.1
1.9 0.2
2.8 0.2
4.2 0.1
1.3
1.3
1.3
1.3
1.3
Externals of figure are the reference.
✽
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Nov. 2012
– EEF-6 –