SP-Cap/ Specialty Polymer Aluminum Capacitors (Conductive Polymer Aluminum Capacitors)
Surface Mount Type
Series:
FD, CD, CX, UD, UE
■ Features
● Low ESR
● Excellent Noise-absorbent Characteristics
● RoHS directive compliant
■ Specifications
Series & Size Code
FD
CD
CX
UD
UE
Category Temp. Range
Rated W.V.Range
Nominal Cap.Range
Capacitance Tolerance
–40 °C to +105 °C
2 V.DC to 6.3 V.DC
100 µF to 560 µF
20 %
2 V.DC to 12.5 V.DC 2 V.DC to 16 V.DC
15 µF to 68 µF 2.2 µF to 220 µF
2 V.DC to 8 V.DC
68 µF to 470 µF
2 V.DC to 8 V.DC
100 µF to 560 µF
Reflow 240 °C : I 0.06 CV (µA) 2minutes (2 V.DC to 4 V.DC)
<
I
0.04 CV or 3 (µA) 2 minutes (6.3 V.DC to 16 V.DC) (Whichever is greater)
<
DC Leakage Current
Reflow 260 °C : I 0.1 CV (µA) 2 minutes
<
tan
0.06 (120 Hz/+20 °C)
0.10 (120 Hz/+20 °C)
<
δ
<
Surge Voltage
Rated Working Voltage 1.25 (15 °C to 35 °C)
҂
After applying rated working voltage for 1000 hours at 105 °C 2 °C, and then being stabilized at +20 °C,
capacitor shall meet the following limits.
Endurance
Capacitance change 10% of initial measured value
tan
Initial specified value
Initial specified value
δ
<
<
DC leakage current
After storing for 500 hours at 60 °C, 90 %
Capacitance change
of initial measurd
value
2, 2.5 V.DC
+70, –20 %
4 V.DC
6.3 V.DC
8 V.DC to 16 V.DC
+40, –20 %
Moisture resistance
+60, –20 %
+50, –20 %
tan
200 % of initial specified value
Initial specified value
δ
<
<
DC leakage current
■ Marking
■ Dimensions in mm(not to scale)
-
+
Cap.
Polarity bar (Positive)
P
P
L
W1
Lot No. W.V. code
(mm)
P 0.3
Series &
Size Code
L 0.2 W1 0.2 W2 0.1
H
FD
CD
CX
UD
UE
7.3
7.3
7.3
7.3
7.3
4.3
4.3
4.3
4.3
4.3
2.4
2.4
2.4
2.4
2.4
1.1 0.1
1.8 0.1
1.9 0.2
2.8 0.2
4.2 0.1
1.3
1.3
1.3
1.3
1.3
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2012
– EE14 –