Aluminum Electrolytic Capacitors
Surface Mount Type
Medium-size TP series V type
High temperature Lead-Free reflow
Features
● Endurance : 125 ℃ 3000 to 4000 h
● High ripple current (2 to 5 times as high as TK series)
● Low ESR (40 to 70 % lower than TK series)
● Large capacitance (Up to 80 % larger than TK series)
● Vibration-proof product (30G guaranteed) is available upon request
● AEC-Q200 compliant
● RoHS compliant
Specifications
Category temp. range
Rated voltage range
Capacitance range
–55 ℃ to +125 ℃
25 V to 80 V
390 μF to 3300 μF
Capacitance tolerance
Leakage current
Dissipation factor (tan δ)
±20 % (120 Hz / +20 ℃)
I ≦ 0.01 CV(μA) After 2 minutes
Please see the attached characteristics list
Rated voltage (V)
Z (–25 ℃) / Z (+20 ℃)
Z (–40 ℃) / Z (+20 ℃)
25
2
4
35 to 80
Characteristics
at low temperature
2
3
(Impedance ratio at 120 Hz)
After applying rated working voltage for 4000 hours at +125 ℃ ± 2 ℃ and then being
stabilized at +20 °C, Capacitors shall meet the following limits.
(J16, K16 size : 3000 h)
Endurance
Shelf life
Capacitance change
Dissipation factor(tan δ) ≦ 300 % of the initial limit
Leakage current Within the initial limit
Within ±30 % of the initial value (35 V or less : Within ±35 %)
After storage for 1000 hours at +125 ℃ ± 2 ℃ with no voltage applied and then being
stabilized at +20 ℃, capacitors shall meet the limits specified in endurance.
(With voltage treatment)
After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the
following limits.
Resistance to
soldering heat
Capacitance change
Dissipation factor(tan δ) Within the initial limit
Leakage current Within the initial limit
Within ±10 % of the initial value
Frequency correction factor for ripple current
Frequency (Hz)
120
1 k
10 k
0.95
100 k to
1.00
Correction factor
0.75
0.90
Marking
Dimensions
Example:25 V 1800 μF
Marking color : BLACK
A±0.2
0.3 max.
Negative polarity marking (–)
Capacitance (μF)
Series identification
1800
E TP
L
W
Rated voltage code
Pressure Relief
()Reference size
Lot number
Unit:mm
Size code
øD
L
A, B
H
I
W
P
K
R.voltage code
Unit:V
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.3
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.3
E
V
H
25
35
50
J
70
K
63
70
80
K21 18.0 21.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.3
・The dimensions of the vibration-proof products, please refer to the page of the mounting specification.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06-Dec-19