Aluminum Electrolytic Capacitors
Surface Mount Type
FN series
V type
: High temperature Lead-Free reflow
: Standard Lead-Free reflow
6.3 V to 50 V
63 V to 100 V
Features
● Endurance : 105 ℃ 2000 h
● Wide voltage range from 6.3 V to 100 V
● High capacitance : 20 % to 80 % higher than FK series
● Vibration-proof product (30G guaranteed) is available upon request (ø6.3 ≦)
● AEC-Q200 compliant
● RoHS compliant
Specifications
Category temp. range
Rated voltage range
Capacitance range
–55 ℃ to +105 ℃
6.3 V to 100 V
10 μF to 1800 μF
Capacitance tolerance
Leakage current
±20 % (120 Hz / +20℃)
I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
Please see the attached characteristics list
Dissipation factor (tan δ)
Rated voltage(V)
6.3 10 16 25 35 50 63 80 100
Characteristics
at low temperature
Z (-25 ℃) / Z (+20 ℃)
Z (-40 ℃) / Z (+20 ℃)
Z (-55 ℃) / Z (+20 ℃)
2
3
4
2
3
4
2
3
4
2
3
3
2
3
3
2
3
3
2
3
3
2
3
3
2
3
3
(Impedance ratio at 120 Hz)
After applying rated working voltage for 2000 hours at +105 ℃ ± 2 ℃ and then being
stabilized at +20 ℃, capacitors shall meet the following limits.
Within ±30 % of the initial value
Endurance
Shelf life
Capacitance change
(For 6.3 V, size B/C, and suffix "U" : Within ±40 %)
Dissipation factor (tan δ) ≦ 200 % of the initial limit
DC leakege current
Within the initial limit
After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being
stabilized at +20 ℃, capacitors shall meet the limits specified in endurance.
(With voltage treatment)
After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the
following limits.
Capacitance change
Dissipation factor (tan δ) Within the initial limit
DC leakege current Within the initial limit
Resistance to
soldering heat
Within ±10 % of the initial value
Frequency correction factor for ripple current
Freq.(Hz)
120
1 k
10 k
100 k to
Cap.(μF)
10 to 470
560 to 1800
0.65
0.70
0.85
0.90
0.95
0.95
1.00
1.00
Marking
Dimensions
0.3 max.
A±0.2
Example : 6.3 V 10 μF
Marking color : BLACK
Negative polarity marking (–)
Capacitance (μF)
10
Series identification
j FN
W
L
Pressure Relief(ø10 and larger)
( )Reference size
Unit:mm
Rated voltage code
Unit:V
Size code
Lot number
øD
L
A, B
H
I
W
P
K
+0.15
-0.20
+0.15
-0.20
+0.15
-0.20
+0.15
ー0.20
B
C
D
4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35
5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35
6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2
10.0 10.2±0.3 10 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2
R.voltage code
j
6.3
10
16
25
35
H
J
K
50
63
80
A
C
E
V
D8
F
2A
100
G
・The dimensions of the vibration-proof products, please refer to the page of the mounting specification.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
31-Jan-20