Conductive Polymer Hybrid Aluminum Electrolytic Capacitors/ZA
Surface Mount Type
Series:
Type:
ZA
V
High temperature Lead-Free reflow
■ Features
Endurance: 1±±±± h at 1±ꢀ °C
●
Low ESR and High ripple current
●
(7± % over, Lower ESR than Current V-FP)
High voltage (to 8± V)
●
●
Equivalent to conductive polymer type Aluminum Electrolytic Capacitor
(There are little characteristics change by temperature and frequency)
● AEC-Q.±± qualified✽
RoHS directive compliant
●
■ Specifications
Category Temp0 Range
Rated W0V0Range
Nominal Cap0Range
Capacitance Tolerance
DC Leakage Current
tan d
–ꢀꢀ °C to +1±ꢀ °C
.ꢀ V0DC to 8± V0DC
1± μF to 33± μF
±.± % (1.± Hz/+.± °C)
I
±0±1 CV or 3 (μA) After . minutes (whichever is greater)
Please see the attached Standard Products list
<
The capacitor shall be subjected to application of the D0C0 voltage with full rated ripple current at +1±ꢀ °C for 1±±±±
hours0 After stabilizing at room temperature(+1ꢀ to 3ꢀ °C), the capacitor shall not exceed the specified limits0
(The sum of DC voltage and ripple peak voltage shall not exceed the rated voltage0)
Capacitance change
tan d
E0 S0 R0
±3± % of initial measured value
.±± % of initial specified value
<
Endurance
Shelf Life
.±± % of initial specified value
initial specified value
Size Code
<
<
DC leakage current
ESR after Endurance
(Ω/1±± kHz) (–4± °C)
C
D
D8
±08
F
G
.0±
104
±04
±03
After storage for 1±±± hours at +1±ꢀ °C±. °C with no voltage applied and then being stabilized at +.± °C,
capacitors shall meet the limits specified in Endurance0 (With voltage treatment)
After reflow soldering and then being stabilized at +.± °C, capacitors shall meet the following limits0
Capacitance change
tan d
±1± % of initial measured value
Resistance to
Soldering Heat
initial specified value
<
DC leakage current
initial specified value
<
■ Frequency correction factor for ripple current
Frequency (Hz)
1.±
±01±
1 k
±03±
1± k
±06±
1±± k to
10±±
Correction factor
■ Marking
■ Dimensions in mm (not to scale)
(Unit : mm)
±03 max0
A±±0.
Example:25 V 33 μF Marking color : BLACK
–
Negative polarity marking (–)
Capacitance (μF)
ꢀꢀ
& ;"
Series identification
+
W
L
Pressure Relief (01± and larger)
( ) Reference size
Rated Voltage Mark
Lot number
Size
code
D
L
A, B
H
I
W
P
K
+ ±01ꢀ
C
D
ꢀ0± ꢀ08±±03 ꢀ03 60ꢀ max0 .0. ±06ꢀ±±01 10ꢀ ±03ꢀ
603 ꢀ08±±03 606 708 max0 .06 ±06ꢀ±±01 108 ±03ꢀ
- ±0.±
Rated Voltage Mark
+ ±01ꢀ
- ±0.±
E
V
H
.ꢀ V
3ꢀ V
ꢀ± V
J
K
63 V
8± V
+ ±01ꢀ
D8 603 707±±03 606 708 max0 .06 ±06ꢀ±±01 108 ±03ꢀ
- ±0.±
F
G
80± 1±0.±±03 803 1±0± max0 304 ±09±±±0. 301 ±07±±±0.
1±0± 1±0.±±03 1±03 1.0± max0 30ꢀ ±09±±±0. 406 ±07±±±0.
This product qualify for AEC-Q.±±, but it has some deviations0
✽
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2014
– EEE-2 –