Electric Double Layer Capacitors (Gold Capacitor)
NEW
Radial Lead Type
Series : HL
Small size
Features
●
Guaranteed 70 °C 2.7 V.DC 2000 h
Guaranteed 85 °C 2.5 V.DC 1000 h
✽1
●
●
●
Low resistance : 30 mΩ max. (1 kHz)
Low temperature : –40 °C guaranteed
RoHS compliant
Recommended Applications
●
●
●
Backup power supply of E-meter, storage (SSD)
Driver assist of motor, actuator
Backup for power supply of drive recorder, emergency brake, door lock releasing device
Specifications
✽1
Category temp. range
Maximum operating voltage
–40 °C to +70 °C (+85 °C )
✽1
2.7 V.DC (2.5 V.DC )
Nominal cap. range
Characteristics at
low temprature
2.5 F
Capacitance change
Internal resistance
4.0 F
7.5 F
30 % of initial measured value at +20 °C (at –40 °C)
< 4 times of initial specified value. (at –40 °C)
After 2000 hours application of 2.7 V.DC at +70 °C
Capacitance change Within 40 % of the initial value
Endurance 1
Internal resistance
< 4 times of initial specified value.
After 1000 hours application of 2.5 V.DC at +85 °C
Capacitance change Within 40 % of the initial value
✽1
Endurance 2
Internal resistance
< 4 times of initial specified value.
After 1000 hours storage at +85 °C 1000 h without load (voltage)
Capacitance change Within 40 % of the initial value
Shelf life
Internal resistance
< 4 times of initial specified value.
Dimensions (not to scale)
Sleeve
fd 0.05
Unit : mm
Capacitance
Vent
0D
L
0d
P
(F)
2.5
4.0
7.5
8.0 20.0 0.6 3.5
10.0 20.0 0.6 5.0
10.0 30.0 0.6 5.0
L+2 max.
14 min.
3 min.
fD+0.5 max.
Characteristics list
Category
Maximum
Capacitance
tolerance
(F)
2.0 to 3.0
3.2 to 4.8
6.0 to 9.0
Internal resistance
Mass
Min.
✽2
Recommended
Capacitance
temp. range operating voltage
(Initial specified value)
Parts number (Reference value) Packaging Q'ty
(F)
discharge current
(°C)
(V.DC)
(Ω) at 1 kHz
(g)
1.5
2.3
3.4
(pcs)
200
200
200
2.5
4.0
7.5
2.5 A
3.5 A
6.0 A
EECHL0E255
EECHL0E405
EECHL0E755
< 0.07
< 0.05
< 0.03
<
<
<
–40 to +70
2.7
✽1
✽1
(+85
)
(2.5 )
1 010×L30
✽
✽
2 The recommended discharge current is a reference value. Please design your equipment (circuit) in consideration of IR drop.
Do not use reflow soldering. Please refer to the page of “Application guidelines”.
Remark1: Install the space of 2 mm or more in the upper part of the product so as not to disturb the movement of the pressure valve.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Jan. 2017