Datasheet > EAALSTIC1708A0

EAALSTIC1708A0

更新时间： 2024-02-22 13:39:47

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

EAALSTIC1708A0 技术参数

DATASHEET

Ambient Light Sensor – Surface Mount

EAALSTIC1708A0

Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once

in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of

each terminal. Be careful because the damage of the product is often started at the time of the hand solder.

Repairing

Repair should not be done after the device have been soldered. When repairing is unavoidable, a double-head

soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the

device will or will not be damaged by repairing.

Note:

1. Above specification may be changed without notice. Everlight Americas will reserve authority on material change for above

specification.

2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification

sheets. Everlight Americas assumes no responsibility for any damage resulting from use of the product which does not comply with

the absolute maximum ratings and the instructions included in these specification sheets.

3. These specification sheets include materials protected under copyright of Everlight Americas Inc. Please don’t reproduce or cause

anyone to reproduce them without Everlight Americas’s consent.

www.everlightamericas.com

1...5 6 78

下载PDF