PF537-08
E0C621A
4-bit Single Chip Microcomputer
● Core CPU Architecture
● 32kHz/455kHz Twin Clock Operation
● SVD Circuit/Analog Comparator
● Watchdog Timer
■ DESCRIPTION
The E0C621A is a CMOS 4-bit microcomputer using an E0C6200A as its core processor. It contains ROM,
RAM, LCD driver circuit, remote-control carrier output circuit, time base counter, analog comparator, watchdog
timer and other functions on a single chip. The E0C621A provides an excellent solution for low-power system
applications such as an infrared remote controller with clock function.
One time PROM version is available.
■ FEATURES
● CMOS LSI 4-bit parallel processing
● Twin clock .............................................32.768kHz (Typ.) Crystal
455kHz (Typ.)
CR or Ceramic oscillation circuit
(selectable by mask option)
● Instruction set........................................100 instructions
● Instruction cycle time ............................32kHz clock mode : 153µsec, 214µsec or 366µsec
455kHz clock mode : 11µsec, 15µsec or 26µsec
● ROM capacity .......................................4,096 × 12 bits
● RAM capacity ........................................208 × 4 bits
● Input port ...............................................8 bits (pull-up resistors are available by mask option)
● Output port ............................................9 bits (clock, buzzer output is available by mask option)
● I/O port ..................................................4 bits
● Remote control carrier (REM)...............1 bit (hardware timer or software timer is selectable by software)
● LCD driver .............................................32 segments × 3 commons or 32 segments × 4 commons
(1/3 or 1/4 duty is selectable by mask option)
● Built-in LCD power supplies..................Voltage regulator, voltage doubler and voltage tripler
● Built-in SVD circuit ................................2.3V ± 0.1V (supply voltage detector) Criteria voltage
● Built-in amplifier ....................................Operational amplifier for MOS input analog comparator
● Built-in watchdog timer (Mask option)
● Interrupts ...............................................External : Input interrupt
Internal : Timer interrupt (32Hz, 8Hz, 2Hz) 1 line (3ch.)
REM interrupt 1 line
2 lines
● Supply voltage ......................................3.0V (2.2V to 3.5V)
● Current consumption ............................HALT mode (32.768kHz)
: 2µA (Typ.)
OPERATING mode (455kHz) : 130µA (Typ.)
● Package ................................................QFP5-80pin (plastic), QFP14-80pin (plastic)
Die form
SEIKO EPSON CORPORATION
1